- Out-of-Stock
NanoPi Neo LTS 256MB single board computer
ID: 578222
NanoPI NEO is a single-board chip from FriendlyELEC with a RAM of 256 MB, successfully competing with the systems created by the giant in this field Raspberry Pi. It is 25% smaller and cheaper than the Raspberry Pi Zero board with similar capabilities
Description
NanoPI NEO is a single-board system from FriendlyELEC with a RAM memory of 256 MB. It is equipped with the Allwinner H3 system offering 4 Coretex-A7 cores. Each core can operate at a frequency of 1.2 GHz. In addition, the board has a Mali-400MP2 graphics processor clocked at 600 MHz. The board is equipped with, among others, an RJ45 port, 2 USB ports (1 USB 2.0 port and 1 micro-USB 2.0 connector), a micro SD memory card slot and interface ports such as: USB (2 additional USB 2.0 ports), UART ( 2 ports RS232), I2C, SPI, PWM, GPIO and audio (microphone input and line audio output). The system is powered by 5V, power consumption according to the manufacturer does not exceed 2A. The system's operation is responsible for the Ubuntu Core distribution, specially prepared by the manufacturer, based on the Linux kernel version 3.4. The system is not factory installed.
Features
- Processor: Allwinner H3, Cortex-A7 quad-core up to 1.2 GHz
- DDR3 RAM memory: 256 MB
- Connectivity: Ethernet 10/100M
- USB host: type A x 1, pin 2.54 mm x 2
- MicroSD slot x 1
- MicroUSB: OTG, for input power
- Debugged serial port: 4-pin, 2.54 mm pitch connector
- Audio input/output port: 5-pin, 2.0 mm high pin connector
- GPIO: 2.54 mm pitch 36-pin. Includes UART, SPI, I2C, IO etc.
- Power supply: DC 5 V / 2 A
- Printed circuit board dimensions: 40 x 40 mm
- Operating temperature: -20 ℃ to 70 ℃
- Weight: 14 g (WITHOUT pins)
- Operating system/software: u-boot, UbuntuCore and Android
578222
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
WiFi module for FriendlyELEC computers
Regular pricezł131.89zł97.51
24h
Available quantity: 3
Available
CAM130 is a 13 MP camera module designed for FriendlyELEC single-board computers. The camera uses the MIPI CSI interface and enables capturing high-resolution images and video in embedded systems, robotics and vision-based applications.
Regular pricezł121.46zł85.10
24h
Available quantity: 1
Available
Other products in the same category (16)
The set consists of STM32 Nucleo NUCLEO-F302R8 plate with STM32F302R8 microcontroller, X-NUCLEO-IHM07M1 plate with BLDC L6230 three-phase motor controller and BR2804-1700kV engine
Retired
No product available!
3-Axis, Digital Magnetometer with I2C interface
Retired
No product available!
10 DOF IMU Sensor (B), Inertial Measurement Unit, Lower Power Consumption
Retired
No product available!
GSM/GPRS/GPS Shield, Phone Module, Arduino Shield Based on SIM908. Waveshare: GSM/GPRS/GPS Shield
Retired
No product available!
16 buttons controlled by only 1 AD port
Retired
No product available!
UART GPS Module, u-blox NEO-6M onboard, curved/horizontal pinheader
Retired
No product available!
No product available!
No product available!
A flux gel cartridge 10ml, necessary for assembly and repair of devices with surface-soldered components (SMT). The syringe makes it easier to apply the flux
Retired
No product available!
Miniature micro-SD card reader with USB 2.0 interface. The reader's casing is made of aluminum, pink. Works with both Windows and Mac OS
Retired
No product available!
Small and handy microSD card reader, enables reading cards on the computer (USB connector) as well as mobile devices (microUSB OTG connector)
Retired
No product available!
Breadboard-friendly development board with 32 bit ARM Cortex-M4. Adafruit 2756, DEV-13736
Retired
No product available!
The FXLN8361 three-axis accelerometer is a module with the FXLN8361 accelerometer system detecting the acceleration of an object during three-axis motion. The module can be supplied with voltage in the range of 3.3 ... 8V and provides two measuring ranges ± 2g and ± 8g. DFRobot SEN0178
Retired
No product available!
The MAXimator is an entry-level evaluation board with modern Altera MAX10 FPGA. The board can interface to external peripheral modules via Arduino Uno Rev 3 connectors. It also features HDMI+CEC+DCC and VGA interfaces
Retired
No product available!
The Kamami USB-Blaster is a programmer and configurator for PLD\'s manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet
Retired
No product available!
Very small Bluetooth 4.1 Low Energy (BLE) development board, with Nordic nRF51822 core, ARM Cortex-M0 SoC plus BLE capable of running at 16MHz with ultra low power consumption. Supports numerous different wireless devices running iOS 7/8, Android 4.3 or higher, and Windows Phone 8.1. WRL-13729
Retired
No product available!
NanoPI NEO is a single-board chip from FriendlyELEC with a RAM of 256 MB, successfully competing with the systems created by the giant in this field Raspberry Pi. It is 25% smaller and cheaper than the Raspberry Pi Zero board with similar capabilities