- Out-of-Stock
Synchronized Stereo Camera HAT - camera expansion board for Raspberry Pi
ID: 579228
An extension module to support two cameras designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one connector of the minicomputer. ArduCAM B0195
Description
An extension module to support two cameras designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via MIPI connectors to one MIPI connector of a minicomputer. It supports the Raspistill and Raspivid commands with the default driver for 5MP and 8MP cameras and cameras up to 16MP with a dedicated driver. Thanks to a common oscillator and I2C transmission, both cameras are fully synchronized. The module significantly expands the capabilities of Raspberry Pi in the area of camera support. It will be used for projects that use stereo vision, 360 cameras or advanced surveillance systems.
Attention!
The set does not include the Raspberry Pi minicomputer, camera or FFC/FPC cables. They must be bought separately.
Prezentacja wideo
Features
- Support all series Raspberry Pi boards, Pi HAT board style (Raspberry Pi 4 model B, Raspberry Pi 3 model B+, Raspberry Pi 3 model B etc.)
- Two MIPI camera inputs and one MIPI camera output
- Support 1, 2 and 4 lane MIPI cameras (input up-to 800Mbps/lane)
- Support Raspistill (preview) and Raspivid (processing) commands for default driver 5MP/8MP pi cameras with half-resolution combine
- Support Arducam RPI cameras up to 16MP with proprietary camera driver with full resolution combine
- Support camera side-by-side combine, channel 0 and channel 1 software switching on the fly
- Support digital pan in half resolution combine, programmable pan speed control
- Board size: 65 x 56 mm
- Weight: 16 g
579228
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flex Cable for Raspberry Pi Camera - 100mm / 4"
zł2.90
24h
Available quantity: 480
Available
Flex Cable for Raspberry Pi Camera - 200mm / 8"
zł2.90
24h
Available quantity: 204
Available
Flex Cable for Raspberry Pi Camera - 300mm / 12"
zł4.31
24h
Available quantity: 20
Available
Flexible cable (tape) 50 cm long, used to connect the camera module with Raspberry Pi computers. The tape has 15 wires and a pitch of 1mm
zł3.03
24h
Available quantity: 20
Available
5 MP camera module with OV5647 sensor compatible with Raspberry Pi boards equipped with CSI connector (e.g. Raspberry Pi 5, 4, 3, 2, Zero), featuring interchangeable M12x0.5 lens and included HX-27227 4 mm lens, approx. 56° horizontal field of view, maximum video resolution 1080p. ArduCam B0031
Regular pricezł134.92zł85.29
Delivery date unknown
No product available!
100cm flexible cable (tape) for connecting the camera module to Raspberry Pi computers. The tape has 15 wires and 1mm pitch
zł8.19
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 177
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł257.89
24h
Available quantity: 56
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 5
Available
IMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module. Arducam B0191
zł61.50
24h
Available quantity: 7
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 8
Available
5MP camera for Raspberry Pi minicomputers (1080p resolution). Equipped with OmniVision OV5647 sensor.
zł22.23
24h
Available quantity: 58
Available
Other products in the same category (16)
SimpleFOC brushless motor driver module dedicated to Arduino boards. SimpleFOC Shield v2.0.4
Retired
No product available!
630 kV brushless DC motor. Powered by 2S to 4S packages, dedicated to drones, airplanes and camera stabilizers
Retired
No product available!
Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 120°, no IR filter. ArduCAM B006604N
Retired
No product available!
Laser scanner using ToF technology. It performs measurements with a frequency of 5 to 13 turns per second and has a range of up to 12 m. Waveshare DTOF LIDAR LD19
Retired
No product available!
The base plate is dedicated to the STM32F429I-DISCO set. It offers all microcontroller interfaces on the connectors located on the edge of the board. Waveshare Open429Z-D Standard
Retired
No product available!
The board with the microcontroller STM32F405RGT6 in the set with the base board and expansion modules. Waveshare Open405R-C Package B
Retired
No product available!
Development board with STM8S208MB microcontroller. It is equipped with numerous connectors, buttons and a joystick, thanks to which it can be used for prototyping devices. Waveshare Open8S208Q80 Standard
Retired
No product available!
Base plate dedicated to the STM32F4DISCOVERY set. It offers all microcontroller interfaces on the connectors located on the edge of the board. Waveshare Open407V-D Standard
Retired
No product available!
Wireless communication module based on the NRF24L01 chip. Equipped with an angular connector, it will be perfect for the construction of small devices. Waveshare NRF24L01 RF Board (B)
Retired
No product available!
FRAM FM24CLXX memory module. It communicates via the I2C interface. Waveshare FM24CLXX FRAM Board
Retired
No product available!
1024×600, 7 inch Capacitive Touch Screen LCD, HDMI interface, supports various systems. Waveshare 7inch HDMI LCD (C) rev3.1
Retired
No product available!
No product available!
A miniature camera module with a 5MP OV5647 sensor dedicated to the Raspberry Pi. Designed for projects where image size and quality are important. Waveshare RPi FPC Camera
Retired
No product available!
Laser distance sensor with a measuring range of up to 2 m, based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Waveshare VL53L0X Distance Sensor
Retired
No product available!
RFID tag sticker for systems operating at 125 KHz. Provides the ability to read and write a unique ID number
Retired
No product available!
RFID tag sticker for systems operating at 125 KHz. Provides the ability to read and write a unique ID number
Retired
No product available!
An extension module to support two cameras designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one connector of the minicomputer. ArduCAM B0195