- Out-of-Stock
Fiberlogy Easy PLA filament in red with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Recommended printing temperature should be in the range of 200°C to 220°C, while the table temperature in the range of 50°C to 70°C. When using pads or other adhesion enhancing agents, table heating is not required. The filament is wound on a spool and vacuum packed.
Fiberlogy is a Polish manufacturer of filaments for FFF/FDM 3D printers. The company has many years of experience in the processing of plastics. Fiberlogy filaments are characterized by high quality, innovation, great variety and are made of proven raw materials with the best parameters.


PLA filament is the basic filament used in 3D printing. It is characterized by good durability, and its properties allow precise printing of even complex elements. Easy PLA is a filament that allows you to get very good quality prints, avoiding printing problems. Thanks to its properties, Easy PLA material is recognized by both novice users and professionals. It is biodegradable and has very good adhesion between print layers.
The filament is available in different colors. It can be used to create prototypes, gadgets, toys and decorations.
Filament works great with most 3D printers available on the market. Check out our offer of 3D printers and choose the best set for you.
Data sheet
Manufacturer
Responsible person
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Easy PLA filament in black, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Black
No product available!
Easy PLA filament in orange, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Orange
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
HK HK15298B High Voltage Coreless Digital MG/BB Servo 66g / 20kg / 0.16s (16272)
No product available!
HK Turnigy dlux 55A SBEC Brushless Speed Controller w/Data Logging (16365)
No product available!
Connectors Polymax 5.5 mm Gold, 10 pairs (20 pcs) (HK2087)
No product available!
No product available!
HK NTM Prop Drive 28 Series Accessory Pack (16719)
No product available!
HK HD Wing Camera 1280x720p 30fps 5MP CMOS (17200)
No product available!
HK Turnigy D3530 / 14 1100KV Brushless Outrunner Motor (18225)
No product available!
Brushless motor Turnigy D3536 / 6 1250KV type Outrunner (HK18227)
No product available!
HK Turnigy D3536 / 9 910KV Brushless Outrunner Motor (18229)
No product available!
Brushless motor D3542 / 4 1450 kV type Outrunner Turnigy (HK18230)
No product available!
HK Turnigy D3542 / 5 1250KV Brushless Outrunner Motor (18231)
No product available!
HK Turnigy D3548 / 4 1100KV Brushless Outrunner Motor (18233)
No product available!
Turnigy D3548/6 790KV Brushless Outrunner Motor
No product available!
Brushless motor Turnigy L2210-1400 (210 W) (HK18544)
No product available!
HK Heavy Duty Alloy 1in Servo Arm - Hitec (Red) (18374)
No product available!
HK Turnigy Reaktor 300W 20A 6S Balance Charger (44112)
No product available!
Easy PLA filament in red, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Red