HobbyKing E-OSD

3.2" LCD TFT display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 320x240 pixels. Waveshare 3.2inch RPi LCD (C)

Development platform powered by Exynos4412 Prime Cortex-A9 Quad Core 1.7Ghz with 1MB L2 cache

Permanent cylindrical neodymium magnet with a diameter of 5 mm and a height of 4 mm.

NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector.

MICROPROCESSOR METER OF CALCULATING CAPACITY AA-AAA - KIT FOR INDIVIDUAL MOUNTING

The DDS generator with a readable alphanumeric display allows you to generate sinus, rectangular or triangle waveforms. The device can also be used for frequency measurement in the 1Hz-60MHz range

 Featuring a quad-core Amlogic processor, advanced Mali GPU, and Gigabit Ethernet

PROXIMITY SWITCH - PLATE

The eXtremestyle silicone cable (2m length) with micro USB connector. Allows you to charge the device and transfer data. eXtreme S20UMW

LED THERMOMETER - 7mm VERSION - PRINTED PLATE AND PROGRAMMED SYSTEM

USB Blaster compliant USB programmer for Altera's PLD (CPLD and FPGA) circuits

LCD 2x16, 80x36mm, LED backlight (AMBER), 4.24mm character

Camera module with USB interface with 2MP resolution. Camera with Sony CMOS IMX323 sensor, the module is equipped with two microphones. ArduCAM UB0212