- Out-of-Stock

Module with relays controlled by the I2C interface. The board allows you to place up to four relays. Due to the fact that the module is based on the ATTiny84 microcontroller, they can be controlled via the I2C interface. ATTiny84 is pre-programmed. The I2C ATTiny84 address is software configurable. Each relay can switch currents up to 40 A at 28-380 V AC.
The kit does not require soldering. In order to connect the relays to the board and AC load, it is necessary to screw the relays and connect the wires.
Arduino libraries are available for the module.
Attention!
The black standoffs and 4-40 screws used to secure them shown in some of the photos are not included with the kit.Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
No product available!
No product available!
Flexible 4-core cable, 100 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17259
No product available!
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
No product available!
Pin strip straight in black, double-breasted, female, 2x5, pitch 1.27mm, THT, RoHS. PBD10S
No product available!
No product available!
HumidIcon™ Digital Humidity/Temperature Sensor, I2C, hydrophobic filter, SOIC8, Honeywell, RoHS
No product available!
LCD 2x16, 80x36mm, FSTN, LED backlight (amber), enhanced temperature range, current consumption 20mA, RoHS
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
AVT kit for self-assembly of a 5V miniature module. AVT1913 / 5 B
No product available!
Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a blue nylon braid
No product available!
The Kamami USB-Blaster is a programmer and configurator for PLD\'s manufactured by Altera. It is fully compatible with USB Blaster, then it can operate with a commercial and evaluation versions of the Altera Quartus project packet
No product available!
A minisumo robot on a tracked chassis with Pololu 100:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3127
No product available!
Module with 4 relays controlled by the I2C interface. Each relay can switch currents up to 40 A at 28-380 V AC. SparkFun KIT-16833