- Out-of-Stock
4" LCD IPS display with touch screen. The display is equipped with a DPI interface for image display and I2C for a touch screen. Resolution 800x480 pixels. Works with minicomputer Raspberry Pi via 40-pin connector. The display supports operating systems: Raspbian and Kali.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
VisionCB-RT-STD is a base plate for VisionSOM-RT modules (i.MX RT). The tile contains, among others Ethernet, USB connectors, connectors compatible with Arduino shields and Raspberry Pi hat, 5 buttons and 5 LEDs. VisionCB-RT-STD, SoMLabs
No product available!
The Counter is a stylised educational model, an interactive study guide to the mechanism, only for learning its essentials and principles of working. It registers repetitive actions. It is an integral part of a device called an “Odometer”. The model has three cylinder gears with numbers from 0 to 9 and a Geneva Drive. UGears 70130
No product available!
No product available!
No product available!
AVT kit for self-assembly protection - a simple car lock. AVT3187 B
No product available!
BleBox DoorBox PRO is a universal controller for gates and doors, ensuring a high level of security and remote control from anywhere in the world. Ble Box DoorBox PRO
No product available!
Orange Pi is a computer with Allwinner A20 processor, 1 GB RAM, 1 Gb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x13 connector compatible with Raspberry Pi and a micro-SD card slot. The computer is equipped with a SATA interface.
No product available!
Adafruit 1628 - Bluefruit EZ-Link Shield - Bluetooth Arduino Serial & Programmer - v1.0
No product available!
No product available!
HK Turnigy D3530 / 14 1100KV Brushless Outrunner Motor (18225)
No product available!
Dragino LoRa Shield is an expansion board for Arduino (Uno, Leonardo, Mega, DUE) with a LoRa communication module (RFM98W system). Works at 433 MHz, maximum power up to 100 mW. In the set with the plate there is also an antenna. Seeed studio 113990194
No product available!
The eMMC 5.1 flash memory module for Hardkernel Odroid C2 computers. 8GB capacity, Android operating system installed. The set includes a microSD adapter. Hardkernel
No product available!
No product available!
No product available!
PCB and programmed circuit for the DDS generator for the 1Hz ... 40MHz range with the sweep. AVT5580 A +
No product available!
IPS 4" LCD display with touch screen. The display is equipped with DPI interface for image display and I2C interface for touch screen. Resolution 800x480 pixels. Waveshare 4inch DPI LCD (B)