- Out-of-Stock
BleBox wLightBox Pro is a module that allows you to control RGBW LED strips and chains via WiFi using a smartphone application. It is powered with the voltage from 12 V to 24 V, has 4 channels with a total capacity of 12 A. It can control one RGBW LED strip, two two-color stripes or four single-color stripes. The module has an external antenna, which significantly increases the operating range of the device and allows you to place it at a considerable distance from the router. wLightBox Pro is also waterproof (IP54 protection), which allows the controller to be used e.g. in the garden. The device has screw connections for mounting wires.

The device is controlled using the wBox application available for Android and iOS platforms. The device is compatible with Amazon Alexa and Google Home.
Flora NeoPixel 30 RGB LED Strip in Reel - White Backing. Adafruit 1376
No product available!
Flora NeoPixel 30 RGB LED Strip in Reel - Black Backing. Adafruit 1460
No product available!
Waterproof NeoPixel tape with RGB LED diodes, 1m long, 60 LEDs per meter, diodes are mounted on a flexible black PCB. Adafruit 1376
No product available!
Waterproof NeoPixel tape with RGB LED diodes with a length of 2 m, 60 LEDs per meter, diodes are mounted on an elastic PCB in black. Adafruit 1376
Dispensing needle for precise application of glue, flux with an internal diameter of 0.7mm and an external diameter of 1mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 1.37mm and an external diameter of 1.8mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.84mm and an external diameter of 1.25mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.6mm and an external diameter of 0.89mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.51mm and an external diameter of 0.8mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.41mm and an external diameter of 0.69mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.25mm and an external diameter of 0.5mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.24mm and an external diameter of 0.45mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 4GB or NVIDIA Jetson TX2i modules. It is equipped with an Ethernet connector, microSD, UART, I2C and GPIO interfaces, USB 2.0 OTG, USB 3.0 ports, 4-line MIPI (I-PEX), CAN, HDMI 2.0 connector and a 7-pin SATA connector. Connect Tech ASG016
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
Adapter for NVIDIA Jetson modules to connect the NVIDIA Jetson AGX Xavier module to the NVIDIA Jetson TX1, TX2 and TX2i carrier. Connect Tech AGX001
No product available!
A module that allows you to control RGBW LED strips and chains via WiFi using a smartphone application. It is powered with the voltage from 12 V to 24 V, has 4 channels with a total capacity of 12 A. BleBox wlightBox Pro