- Out-of-Stock

A compact development kit from the M5StickC series equipped with an ESP32 Pico. Equipped with a display, it will work in IoT-related projects, as a STEM educational tool or in "wearable" devices. M5Stack K016-P
The M5StickC PLUS is a compact development kit from the M5StickC series equipped with an ESP32 Pico. ESP32 is a module with a dual-core 32-bit Xtensa 240 MHz LX6 processor, with Wi-Fi and Bluetooth communication and 4 MB of Flash memory.
The M5StickC set has a USB type C interface, which is used for charging, programming and serial communication, an integrated 1.14 "screen and a built-in RTC module. The module is powered by a 120 mAh battery, which is managed by the AXP192 system. M5StickC PLUS also has two programming buttons, microphone, IMU sensor MPU6886 and the ability to communicate in infrared.An additional GPIO pins are also available to the user.
The M5StickC PLUS can be programmed via Arduino and UIFlow (using Blockly, MicroPython language). The set will be perfect for IoT-related projects, as a STEM educational tool or for "wearable" devices. Full documentation of the set and guides are available on the manufacturer's website.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008
M5Stack series development kit equipped with ESP32 Pico. Equipped with a 5x5 RGB LED matrix, it will work in IoT-related projects or in "wearable" devices. M5Stack C008-B
4x20 LCD display with blue backlight, equipped with English and Japanese character generator. Artronic LCD-PC-2004A-BLW-W/B E12
No product available!
Development kit based on MediaTek MT7622 chip with 64-bit ARM Cortex-A53 dual-core processor. It is equipped with 1GB SDRAM, 8GB eMMC memory and numerous connectors and interfaces such as SATA, Ethernet, microSD socket and USB 3.0 Host. The kit creates a router that can run on various open source operating systems, including OpenWrt and Linux. Banana Pi BPI-R64
No product available!
No product available!
No product available!
Portable oscilloscope for automotive applications with 8-inch LCD display and touch screen. It has two measurement channels and is characterized by good measurement parameters: 100 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig ATO1102
No product available!
The case is designed for minicomputers Raspberry Pi 4 model B. It is made of aluminum and also serves as a large heat sink. Waveshare PI4-CASE-E
No product available!
No product available!
LPY510AL Dual-Axis (Pitch and Yaw or XZ) Gyro with ą100°/s and ą400°/s Ranges
No product available!
Soldering station 5in1: hotair 100..480 degrees C, soldering tip 75W, power supply 0..15V / 1A, RF signal tester, voltage meter. Included, among others set of nozzles and wires for the power supply
No product available!
No product available!
No product available!
AVR, 128kB Flash, 8kB RAM, 4kB EEPROM, 2xUART, USB, PWM, SPI, ADC, TQFP64, RoHS
No product available!
Pre-installed Ubuntu 16.04 or latest version. eMMC Version 5.0 interface or higher version from Samsung. JEDEC/MMCA version 5.0 : HS400 interface with 8bit DDR mode. The eMMC chipset is only compatible with Amlogic S905 and S805 series(ODROID-C1+ / C0 / C2)
No product available!
No product available!
No product available!
No product available!
A compact development kit from the M5StickC series equipped with an ESP32 Pico. Equipped with a display, it will work in IoT-related projects, as a STEM educational tool or in "wearable" devices. M5Stack K016-P