- Out-of-Stock
4.2" 3-color E-Ink e-Paper module (C) 400x300 - Waveshare 14228
ID: 582583
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 4.2" and a resolution of 400x300 px. SPI interface. Waveshare 4.2inch e-Paper Module (C)
Description
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 4.2" and a resolution of 400x300. It has the ability to display content with a two-level gray scale. The built-in controller communicates via the SPI interface. Displays of this type are characterized by high contrast of the displayed image and take power only when the displayed content is changed. The module has a built-in voltage level converter, which makes it compatible with 3.3 V and 5 V systems. On the product page, support is available in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 4.2"
- Resolution: 400 x 300 px
- Display color: yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.212 × 0.212
- Full refresh time: 15 seconds
- Power consumption: 26.4 mW
- Viewing angle:> 170 °
- No backlight, displays the last content after power off
- Low energy consumption
- Built-in logic level converter, compatible with 3.3V/5V MCU
- Working voltage: 3.3V/5V
- Display size: 84.8 x 63.6 mm
- Outline dimensions: 103 x 78.5 mm
Kit contains
- 4.2inch e-Paper Module (C) display
- PH2.0 20cm 8-pin cable
582583
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 4,2
- Resolution
- 400 x 300 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 101
Available
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł155.00
24h
Available quantity: 15
Available
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł79.64
24h
Available quantity: 19
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł299.00
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 89
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 125
Available
Module with a 3-color (red, black, white) e-Paper display with a diagonal of 4.2" and a resolution of 400x300 px. SPI interface. Waveshare 4.2inch e-Paper Module (B)
zł150.54
24h
Available quantity: 4
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
Other products in the same category (16)
Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a black nylon braid. Only for charging
Retired
No product available!
Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a blue nylon braid
Retired
No product available!
Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a yellow nylon braid
Retired
No product available!
Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has an orange nylon braid
Retired
No product available!
Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a green nylon braid
Retired
No product available!
Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a dark pink nylon braid
Retired
No product available!
No product available!
Board with prototype holes for BeagleBone Black minicomputers. SparkFun DEV-12774
Retired
No product available!
No product available!
No product available!
DIP module with ATmega128A microcontroller, quartz 16 MHz. It fits perfectly with the ZL8AVR set
Retired
No product available!
No product available!
Hotair soldering station 100..480 deg. C, soldering tip 75W 200..480 deg. C. Settings are displayed on LED displays
Retired
No product available!
Soldering station 5in1: hotair 100..480 degrees C, soldering tip 75W, power supply 0..15V / 1A, RF signal tester, voltage meter. Included, among others set of nozzles and wires for the power supply
Retired
No product available!
No product available!
No product available!
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 4.2" and a resolution of 400x300 px. SPI interface. Waveshare 4.2inch e-Paper Module (C)