- Out-of-Stock
2.9" 3-color E-Ink e-Paper module (C) 296x128 - Waveshare 14227
ID: 582586
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. SPI interface. Waveshare 2.9inch e-Paper Module (C)
Description
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.9" and a resolution of 296x128. It has the ability to display content with a two-level gray scale. The built-in controller communicates via the SPI interface. Displays of this type are characterized by high contrast of the displayed image and take power only when the displayed content is changed. The module has a built-in voltage level converter, which makes it compatible with 3.3 V and 5 V systems. On the product page, support is available in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 2.9"
- Resolution: 296x128 px
- Display color: yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.138 × 0.138
- Full refresh time: 15 seconds
- Power consumption: 26.4 mW
- Viewing angle:> 170 °
- No backlight, displays the last content after power off
- Low energy consumption
- Built-in logic level converter, compatible with 3.3V/5V MCU
- Working voltage: 3.3V/5V
- Display size: 66.89 × 29.05mm
- Outline dimensions: 89.5 × 38mm
Kit contains
- 2.9inch e-Paper Module (C)
- PH2.0 20cm 8-pin cable
582586
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,9
- Resolution
- 296 x 128 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 149
Available
STM32 Nucleo development board for STM32 F1 series - with STM32F103RBT6 MCU, 128KB flash memory, STM, RoHS
zł155.00
Delivery date unknown
No product available!
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł78.42
24h
Available quantity: 4
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł257.89
24h
Available quantity: 51
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 (4 x Cortex-A72) running at 1.8 GHz, 3 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł481.73
24h
Available quantity: 80
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł779.00
24h
Available quantity: 8
Available
Jetson Nano Dev Kit with ARM Cortex-A57 1.43 GHz CPU, 4 GB RAM and NVIDIA Maxwell GPU - Waveshare...
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
zł1,226.30
24h
Available quantity: 10
Available
Other products in the same category (16)
AVT kit for self-assembly of a power controller with LCD display. AVT3218 B
Retired
No product available!
Assembled power amp with LCD display. AVT3218 C
Retired
No product available!
RGB LED 32 x 32 display module (1024 LEDs). Refresh rate 1: 8. It has two IDC connectors, which allows you to connect multiple displays in series. SparkFun SPX-14633
Retired
No product available!
TFMini is a small laser rangefinder with a measuring range of 0.3 to 12 meters. The measurement resolution is 5 mm. ToF technology (Time of Flight) is used for measurement. Communication with the sensor takes place via the UART interface. SparkFun SEN-14588
Retired
No product available!
GraspIO Cloudio is HAT for use with Raspberry Pi. It allows creating many interesting IoT projects. It is based on the ATmega 32U4 microcontroller. It has an OLED display, an IR receiver, a light sensor, a temperature sensor, an RGB LED and a buzzer. CLOUDIO-SMRTDEV-R-V1
Retired
No product available!
No product available!
BleBox AirSensor is an air quality sensor informing about the presence of harmful dust (PM1, PM2,5, PM10) suspended in the home and outside.
Retired
No product available!
SparkFun BlackBoard is a base plate compatible with Arduino. It is equipped with Atmega 328P microcontroller. It has 14 I / O lines (including 6 PWM channels) and 6 analogue inputs. It has a connector in accordance with the Qwiic standard. SparkFun SPX-14669
Retired
No product available!
SparkFun Papa Soundie Audio Player is a board with ATmega328P microcontroller and VS1000D chip, which allows you to play sounds (in OGG Vorbix and WAV format) stored on a microSD memory card. The board has a 3.5 mm jack connector. SparkFun DEV-14554
Retired
No product available!
No product available!
Printed circuit board and programmed solar collector differential controller. AVT5621 A +
Retired
No product available!
AVT kit for self-assembly of the solar collector differential controller. AVT5621 B
Retired
No product available!
Assembled solar collector differential controller. AVT5621 C
Retired
No product available!
Printed circuit board and programmed countdown timer system. AVT5622 A +
Retired
No product available!
AVT set for self-assembly of the countdown clock. AVT5622 B
Retired
No product available!
No product available!
Module with a 3-color (yellow, black, white) e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. SPI interface. Waveshare 2.9inch e-Paper Module (C)