.png)
- Out-of-Stock
Sanyo NCR18650GA - Li-Ion 18650 3.7V 3450mAh battery
ID: 583263
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3450 mAh. Sanyo NCR18650GA
Description
The 18650 Li-Ion battery is a reliable power source that offers a unique combination of high capacity and discharge current, ideal for a wide range of electronic applications. With a nominal voltage of 3.7V and an impressive capacity of 3450mAh, the battery provides long-lasting power for your devices, ensuring reliability and performance.
Attention!
The battery has no protection against overcharging and deep discharge. To charge the battery, use processor chargers with a charging cut-off at a voltage of 4.2 V.Features
- Technology: Li-Ion (lithium-ion)
- Type: 18650
- Nominal voltage: 3.7V
- Battery capacity: 3450 mAh
- Minimum capacity: 3350 mAh
- Charging current: 1.675 A.
- Maximum discharge current: 10 A
- Maximum charging voltage: 4.2V
- Maximum cut-off voltage: 2.5V
- Dimensions: 18.3 x 65.1 mm
- Weight: 49.5 g
583263
Data sheet
- Battery type
- 18650
Li-Ion - Output voltage
- 3.7V
- Battery capacity
- 3500 mAh
- Battery configuration
- 1S
- Number of cells
- 1
- Output/Connector
- none
- Length
- 65,1 mm
- Width
- 18,3 mm
- Thickness
- 18,3 mm
- Weight
- 49,5 g
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Microprocessor charger with balancer (12 V DC supply), loads LiIon, LiPo, LiFe, Ni-Cd, Ni-MH, PB packs.
zł92.15
Delivery date unknown
No product available!
PRT-10217 - LiPo Charger Basic - Micro-USB
zł56.52
24h
Available quantity: 1
Available
Safety system for two Li-Ion cells with 11.1V. The module has the function of charging cells with the balancer, discharging and the function of protecting the cells against discharge. Cells can be charged with continuous current up to 20A and discharged with current 40A. modBMS40A
zł12.13
24h
Available quantity: 2
Available
Safety system for two Li-Ion cells with 7.4V. The module has the function of charging cells with the balancer, discharging and the function of protecting the cells against discharge. Cells can be charged with continuous current up to 5A. modBMS5A
zł7.04
24h
Available quantity: 10
Available
Two-channel processor charger designed for Li-Ion cylindrical batteries in various sizes (including 18650). It can charge batteries both with PCM protection and without protection. The nominal charging current in the main phase is 0.5A per channel. XTAR MC2
zł24.78
24h
Available quantity: 3
Available
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
zł29.90
Delivery date unknown
No product available!
Other products in the same category (16)
SanDisk Ultra microSDHC card with 16 GB capacity, maximum read speed up to 98 MB / s, SD adapter included. SanDisk SDSQUAR-016G-GN6MA
Retired
No product available!
High quality stable and low noise power supply for Odroid XU4 and HC1. DC 5.5x2.1 plug
Retired
No product available!
No product available!
Arducam USB shield is a module that allows you to connect some ArduCam cameras to a PC or minicomputers, eg Raspberry Pi, BeagleBone etc. The module supports most cameras with a serial interface that have a resolution of 0.3 ... 14 MPix. Attached to the module are appropriate libraries that facilitate image processing, eg using OpenCV software. ArduCam B0095
Retired
No product available!
Arducam Nano RPI Module is a minicomputer equipped with Broadcom BCM2835 processor and VideoCore IV GPU. The module has two CSI connectors for connecting cameras, video output (PAL), SPI, I2C, UART, and GPIO. ArduCam B0101
Retired
No product available!
Evaluation set designed for the use of Internet of Things based on ArduCAM-Mini-2MP and ArduCAM-ESP8266-Nano-V2 modules. ArduCAM-Mini-2MP is a module with a 2 megapixel camera with an OV2640 transducer and an ESP8266 chip. Mounting the M12 lens. ArduCAM B0085
Retired
No product available!
3.5 "TFT display with touch panel, transparent housing and 16 GB SD card for Raspberry Pi 3. ArduCAM U470302
Retired
No product available!
Display with a touch screen (resistive panel) with a diagonal of 3.5 inches and a resolution of 480 x 320 pixels. Uses the SPI interface. Intended for use with the Raspberry Pi Zero / B + / 2/3 minicomputer. ArduCAM U470301
Retired
No product available!
A set of basic electronic components complete with contact plate, connecting cables and Mega2560 R3. It is ideal for beginner electronics who also know Arduino. ArduCAM KB0003
Retired
No product available!
A set of basic electronic components complete with contact plate, connecting cables and board compatible with Arduino UNO R3. It is ideal for beginner electronics who also know Arduino. Uctronics KB0002
Retired
No product available!
A set of basic electronic components complete with contact plate, connecting cables and Arduino UNO R3. It is ideal for beginner electronics who also know Arduino. ArduCAM KB0001
Retired
No product available!
Orange filament 1.75 mm 0.85 kg Easy PLA by Fiberlogy
Retired
No product available!
No product available!
No product available!
12 pin GPIO ribbon cable (200mm) for Odroid XU4 and Odroid XU4Q
Retired
No product available!
7 pin GPIO ribbon cable (20 cm) for Odroid C4
Retired
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3450 mAh. Sanyo NCR18650GA