 
        
           
        
          4-in-1 module designed for 18650 Li-Ion batteries. It can be used as:
There are SW pads on the board, to which the switch can be connected (in power source mode). When operated as a UPS, the SW pads should be short-circuited.
The module will be widely used, both as a charger for mobile devices and a backup source that maintains power.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
PRT-10217 - LiPo Charger Basic - Micro-USB
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
 No product available!
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
 No product available!
The charger module is designed for 2 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
 No product available!
LiPo 3.7 V battery charger module with USB Type-C socket. DFRobot DFR0668
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
 No product available!
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
3.7V li-ion battery charger based on TP4056 chip equipped with USB type C connector. HW-373
 No product available!
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
 
                    4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module