Lithium 3A battery charger module with USB type C connector
ID: 587665
5906623468256
zł7.01
Tax included
zł5.70 tax excl.
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
Description
The charger is designed for lithium batteries. It can charge batteries both with and without PCM protection. The maximum charging current is 3 A, charging is performed to a voltage of 4.2 V or 4.35 V (configurable). The module is equipped with a USB type C connector, but the user can also connect the 5 V input voltage using the pads. The charger has an implemented three-stage CC/CV charging process to keep the cell in good condition by charging with the appropriate current at each stage and ending the charging process at the right moment.
Features
- 3.6-3.7V Li-ion battery types
- Input voltage: 4.5 to 5.5V
- Maximum charging current: 3 A
- Charging end voltage: 4.2V or 4.35V
- CC/CV charging mode
- Charging current below 3V: 100mA
- Dimensions: 31 x 15 mm
587665
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 25
Available
Cable with USB typ A and USB typ C connectors, compatible with Quick Charge 3.0, cable length 1,8m. LANBERG
zł11.06
24h
Available quantity: 4
Available
Cable with USB typ A and USB typ C connectors, cable length 1m. LANBERG
zł8.59
24h
Available quantity: 9
Available
Other products in the same category (16)
PRT-10217 - LiPo Charger Basic - Micro-USB
zł56.52
24h
Available quantity: 1
Available
Available
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł25.30
24h
Available quantity: 3
Available
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
zł151.60
24h
Available quantity: 1
Available
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply
zł2.10
24h
Available quantity: 56
Available
Available
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446
zł34.67
24h
Available quantity: 1
Available
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
zł67.16
3 weeks
No product available!
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
zł95.10
3 weeks
No product available!
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
zł25.55
24h
Available quantity: 2
Available
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
zł30.65
24h
Available quantity: 2
Available
3.7V li-ion battery charger based on TP4056 chip equipped with USB type C connector. HW-373
zł2.72
24h
Available quantity: 333
Available
The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.
zł12.61
4 weeks
No product available!
LiPo 3.7 V battery charger module with USB Type-C socket. DFRobot DFR0668
zł23.01
24h
Available quantity: 6
Available
LiPo 3.7 V battery charger module with a microUSB socket. DFRobot DFR0667
zł27.22
24h
Available quantity: 2
Available
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
zł3.96
24h
Available quantity: 105
Available
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell