LiPo Charger/Booster - module with LiPo charger and Step-Up 5V 1A converter
ID: 566364
5906623419838
zł95.10
Tax included
zł77.32 tax excl.
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
Description
Module with single-purpose LiPo charger and inverter. It uses the MCP73831 charger system with a maximum charging current of up to 500 mA and the DC-DC Step-Up converter PAM2401 with an output voltage of 5 V and current efficiency of up to 1 A. The charging input is connected via a micro USB connector or pins, the battery via a JST PH connector, and the output to pins marked with symbols +-. The board has a pin that turns off the converter and a battery charging switch, which provides full control over the module's operation. Perfect as a power module for a small mobile robot. Full documentation is available on the product page.
Features
- MCP73831 500 mA charger
- DC-DC Step-Up Converter PAM2401 5V, 1A
- Dedicated to LiPo batteries
- Battery charging switch
- Inverter output enable pin
- LED indicators for power and charging
566364
Data sheet
- Output voltage
- 5th
- Output current
- 1A
- Converter type
- Step-up
- Supply voltage min
- 0,9 V
- Supply voltages max
- 4,75 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
zł13.36
24h
Available quantity: 11
Available
Available
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
zł67.16
Delivery date unknown
No product available!
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 13
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł3.49
24h
Available quantity: 24
Available
Li-Po battery with a rated voltage of 3.7 V and a capacity of 400 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP403035
zł12.73
Delivery date unknown
No product available!
Other products in the same category (16)
A switching converter that stabilizes a 5V input voltage from 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5581
zł13.17
24h
Available quantity: 3
Available
A switching converter that regulates 12V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5585
zł12.90
24h
Available quantity: 10
Available
A small DC - DC boost module that converts a 0.9..5V power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. It integrates a PFM DC-DC boost control chip. FIT0471
zł19.75
24h
Available quantity: 3
Available
Step-Up converter with adjustable output voltage from 5 to 40 V, input voltage from 3 to 35 V and a maximum current of 5 A
zł8.38
24h
Available quantity: 32
Available
The converter module converts the voltage in the range of 3-7.2V to 200KV with an efficiency of over 90%. It is compact with dimensions of 24 x 64 mm and operates in temperatures from -40°C to 85°C.
zł8.36
24h
Available quantity: 15
Available
The Step-UpU1V10F3 Buck Voltage Regulator module with output voltage 3.3V, input voltage range of 0.5-5.5V and a maximum output current of 1.2A. Pololu 2563
zł29.25
24h
Available quantity: 2
Available
XL6009E1 Step-Up converter with an output voltage of 1.23 to 30 V, an input voltage of 4 to 35 V and a maximum current of up to 3 A
zł6.95
24h
Available quantity: 145
Available
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 5 V and a maximum input of up to 2 A. Pololu 4941
zł25.10
24h
Available quantity: 4
Available
DC-DC Step-Up converter U3V40F6 with an output voltage of 6 V, an input voltage of 1.3 to 6 V and a maximum output current of 4 A. Pololu 4013
zł39.15
24h
Available quantity: 3
Available
DC-DC Step-up converter module based on the U3V70F12 system. Input voltage 2.9-12V, output voltage 12V, maximum current 10A. Two mounting holes. Pololu 2895
zł85.20
24h
Available quantity: 1
Available
A switching converter that regulates 18V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5587
zł14.17
24h
Available quantity: 5
Available
Step-up DC-DC converter module based on the LM2587 circuit, input voltage 3.5..30V, regulated output voltage 4..30V. The module is equipped with ARK connectors
zł14.77
4 weeks
No product available!
The Step-Up NCP1402 Buck Voltage Regulator module with output voltage 3.3V, input voltage range of 0.8-3.3V and a maximum output current of 200 mA. Pololu 2114
zł38.47
24h
Available quantity: 2
Available
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 7.5 V and a maximum input of up to 2 A. Pololu 4943
zł25.07
24h
Available quantity: 3
Available
The USB Step-Up converter module converts 3.5-12V input voltage to 4-24V output, offering different power values depending on the voltage level. Equipped with a 3-bit digital display, it has a compact size of 80 x 20 x 14mm.
zł10.11
24h
Available quantity: 1
Available
Step-Up converter with an output voltage of 2 to 28 V, an input voltage of 2 to 24 V and a maximum current of 2 A
zł3.31
4 weeks
No product available!
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380