Adjustable LiPo Charger - module with an adjustable LiPo charger
ID: 566363
5906623419821
zł66.06
Tax included
zł53.71 tax excl.
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
Description
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. The board is based on the MCP73831 chip, which can accept an input voltage in the range from 3.75 V to 6 V (5 V recommended), which is supplied via a microUSB connector or pins. The module is equipped with a JST PH connector, pins and a 2450 type socket for connecting the battery and switches to regulate the charging current. Two LEDs indicate the charging status and power supply. Full documentation is available on the product page.
Features
- Working voltage: 3.75V to 6V
- Adjustable current: 15 mA to 500 mA
- Three battery inputs: JST PH connector, PTH pins or 2450 socket
- Charge status LED
566363
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Blue USB 3.0 A cable - microUSB 3.0 B with 1m length, allowing SuperSpeed transmission (up to 5Gbit / s = 625MB / s)
zł13.36
24h
Available quantity: 11
Available
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 32
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 16
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł3.49
24h
Available quantity: 20
Available
Li-Po battery with a rated voltage of 3.7 V and a capacity of 400 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP403035
zł12.72
24h
Available quantity: 8
Available
Other products in the same category (16)
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł25.30
24h
Available quantity: 3
Available
The charger module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł25.20
4 weeks
No product available!
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
zł26.27
24h
Available quantity: 2
Available
USB charger equipped with XT60 input socket. It can be powered by Lipo 2-6S batteries. AOKoda QC3.0 USB Charger
zł70.69
24h
Available quantity: 1
Available
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
zł30.65
24h
Available quantity: 3
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł16.29
4 weeks
No product available!
The charger module is designed for 5 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł22.45
4 weeks
No product available!
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
zł33.73
24h
Available quantity: 10
Available
LiPo 3.7 V battery charger module with a microUSB socket. DFRobot DFR0667
zł27.22
24h
Available quantity: 2
Available
A boost charger module that allows you to charge batteries from USB, DC, or solar panels, and power devices requiring 5V. Equipped with the BQ25185 and TPS61023, it provides high efficiency, optimized power consumption, and support for 500mAh or larger batteries. Adafruit 6106
zł49.73
4 weeks
No product available!
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
zł7.01
24h
Available quantity: 9
Available
A versatile and compact 3.3V power solution, ideal for IoT and mobile device projects. It combines a functional LiIon/LiPo battery charger with a TPS62569 buck converter, providing a stable 3.3V from multiple sources – USB, DC (up to 18V) or solar panel. With PV charging optimization, Power Path and LED indication, the board provides reliable power without the need for additional modules. Adafruit 6092
zł45.36
4 weeks
No product available!
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł23.86
24h
Available quantity: 2
Available
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
zł25.30
24h
Available quantity: 1
Available
MPPT charge controller module for photovoltaic systems. It supports battery charging with 18V and 3A current, it can charge Lead Acid batteries.
zł28.88
24h
Available quantity: 38
Available
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector
zł33.01
24h
Available quantity: 3
Available
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380