LiPo/LiFePO4 1A charger module with TP5000 chip
ID: 585114
5906623475117
zł6.79
Tax included
zł5.52 tax excl.
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
Description
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with a default charging current of 1 A. On the board there is an LED indicator informing about the battery charge status - the charging mode is indicated by blinking red and green colors, while the green color indicates the battery charge.
The maximum charging current can be modified by means of resistors placed on the module:
- 0.5 A - 0.2 Ω resistor in place of R100
- 1 A - 0.1 Ω resistor at R100 (default)
- 1.5 A - 0.2 Ω resistor next to R100
- 2 A - 0.1 Ω resistor next to R100
Charging current above 1 A requires additional heat dissipation heat sink.
Features
- Input voltage: 4.5 to 9V
- Output voltage: 4.2V or 3.6V (default 4.2V)
- Output current: 1 A (default)
- LED indicator
- Charging LiPo and LiFePO4 batteries
- Dimensions: 21.5 x 14.5 x 4.2 mm
Kit contains
- Charger module
- LED
585114
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.
zł12.61
Delivery date unknown
No product available!
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
zł24.69
24h
Available quantity: 1
Available
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP601730
zł19.78
24h
Available quantity: 2
Available
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1850 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP704452
zł39.78
24h
Available quantity: 5
Available
Li-Po battery with a rated voltage of 3.7 V and a capacity of 1200 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP883440
zł26.40
Delivery date unknown
No product available!
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP502030
zł11.39
24h
Available quantity: 12
Available
Other products in the same category (16)
Available
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
zł33.83
24h
Available quantity: 2
Available
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
zł67.16
3 weeks
No product available!
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
zł95.10
24h
Available quantity: 1
Available
The charger module is designed for 5 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł23.00
24h
Available quantity: 18
Available
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
zł151.60
3 weeks
No product available!
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
zł4.22
24h
Available quantity: 26
Available
MPPT charge controller module for photovoltaic systems. It supports battery charging with 18V and 3A current, it can charge Lead Acid batteries.
zł28.88
24h
Available quantity: 38
Available
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł25.30
24h
Available quantity: 3
Available
LiPo 3.7 V battery charger module with USB type C socket. SparkFun PRT-15217
zł56.56
24h
Available quantity: 1
Available
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector
zł33.01
4 weeks
No product available!
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
zł38.60
24h
Available quantity: 5
Available
PRT-10217 - LiPo Charger Basic - Micro-USB
zł69.09
24h
Available quantity: 1
Available
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
zł7.01
4 weeks
No product available!
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
zł26.43
24h
Available quantity: 4
Available
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
zł30.65
24h
Available quantity: 3
Available
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A