Charger module for 3S Li-ion batteries with USB type C and QC support
ID: 1184664
5906623466801
zł23.86
Tax included
zł19.40 tax excl.
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
Description
The charger module is designed for 3 Li-Ion cells. It has protection against excessive discharge. It is equipped with a micro USB and USB Type-C connector and supports quick charging (QC) with a voltage of 5 to 12 V. The charger module is an ideal solution for people who need reliable and precise control over Li-Ion batteries. The module allows, among other things, to balance the voltage between individual battery cells, control the charge and discharge voltage, as well as monitor the temperature, which allows you to avoid excessive discharge, overcharging, overheating and short circuit. It is able to detect a failure and turn off the battery in order to protect devices and avoid damage to the battery. To monitor the temperature, it is necessary to connect an external NTC sensor and unsolder the resistor marked as NTC.
Features
- Charging interface: USB micro B or USB type C, IN+/IN- pads.
- Support for QC fast charging function 5-12V
- Maximum charging voltage: 10,95 V
- Power: up to 18 watts
- Configurable charging cut-off voltage
- Charging voltage per cell: 4,25 V
- Discharge cut-off voltage: 2,7 V
- Operating temperature range: -20°C to 85°C
- Dimensions: 36 x 20 x 4.6 mm
1184664
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The charger module is designed for 2 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł23.00
24h
Available quantity: 10
Available
The charger module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł25.20
24h
Available quantity: 10
Available
The charger module is designed for 5 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł23.00
24h
Available quantity: 20
Available
Other products in the same category (16)
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
zł30.65
24h
Available quantity: 2
Available
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
zł25.55
24h
Available quantity: 8
Available
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł25.30
24h
Available quantity: 3
Available
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
zł24.69
24h
Available quantity: 9
Available
The charger module is designed for 2 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł23.00
24h
Available quantity: 10
Available
A miniature module with a LiPo battery charger with a capacity of 500 mA. SparkFun DEV-11893
zł51.30
3 weeks
No product available!
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
zł7.01
4 weeks
No product available!
The charger module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł25.20
24h
Available quantity: 10
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł15.65
4 weeks
No product available!
A boost charger module that allows you to charge batteries from USB, DC, or solar panels, and power devices requiring 5V. Equipped with the BQ25185 and TPS61023, it provides high efficiency, optimized power consumption, and support for 500mAh or larger batteries. Adafruit 6106
zł49.73
4 weeks
No product available!
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
zł6.79
24h
Available quantity: 19
Available
Available
3.7V li-ion battery charger based on TP4056 chip equipped with USB type C connector. HW-373
zł2.80
24h
Available quantity: 294
Available
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
zł21.71
24h
Available quantity: 6
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł14.85
24h
Available quantity: 6
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł14.10
24h
Available quantity: 15
Available
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).