LiPo Amigo Pro - LiPo and LiIon battery charger module
ID: 1180710
769894021408
zł41.44
Tax included
zł33.69 tax excl.
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612
Description
Charger module based on the popular MCP73831 chip. It is dedicated to charging single-purpose LiPo and LiIon batteries with a nominal voltage of 3.7 V with a maximum charging current of 200 mA in the default mode or 500 mA in the Fast Charge mode. The cells are connected to the board via the JST-PH connector, and the charging source via the USB type C connector. The board also has a charging LED. The user can power the external device during charging thanks to the 4.2 V output on the second JST-PH connector. In addition, the charger has a built-in overheating and overcharging protection in the form of the XB6096I2S chip. The module is small in size. It can be used both as a separate charger for small LiPo and LiIon cells, as well as as an element of a larger project.
Features
- MCP73831 chip
- Designed to charge LiPo and LiIon 3.7 V batteries
- Charging current: 200 mA (default), 500 mA (Fast Charge)
- Battery connector: JST-PH 2.0
- Charging Connector: USB Type-C
- Charging LED
- Overheat and overcharge protection XB6096I2S
- On / Off button
- JST-PH connector for powering external devices (4.2 V)
- Dimensions: 36 x 23 x 7 mm
1180710
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Li-Po battery 3.7V / 450mAh, PCM, connector 2 pins, cable length 150mm. Akyga LP403045
zł14.98
24h
Available quantity: 3
Available
Li-Po battery 3.7V / 980mAh, PCM protection, connector, 2 pins, cable length 150mm. Akyga LP573450
zł24.28
24h
Available quantity: 11
Available
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.26
24h
Available quantity: 18
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 5
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 25
Available
Charger module dedicated to single-purpose LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM611
zł29.52
24h
Available quantity: 5
Available
Other products in the same category (16)
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
zł151.60
24h
Available quantity: 1
Available
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply
zł2.10
24h
Available quantity: 55
Available
Available
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446
zł34.67
24h
Available quantity: 1
Available
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
zł67.16
3 weeks
No product available!
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
zł95.10
3 weeks
No product available!
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
zł25.55
24h
Available quantity: 2
Available
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
zł30.65
24h
Available quantity: 2
Available
3.7V li-ion battery charger based on TP4056 chip equipped with USB type C connector. HW-373
zł2.72
24h
Available quantity: 330
Available
The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.
zł12.61
4 weeks
No product available!
LiPo 3.7 V battery charger module with USB Type-C socket. DFRobot DFR0668
zł23.01
24h
Available quantity: 6
Available
LiPo 3.7 V battery charger module with a microUSB socket. DFRobot DFR0667
zł27.22
24h
Available quantity: 2
Available
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
zł3.96
24h
Available quantity: 105
Available
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector
zł33.01
4 weeks
No product available!
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
zł24.69
24h
Available quantity: 1
Available
USB charger equipped with XT60 input socket. It can be powered by Lipo 2-6S batteries. AOKoda QC3.0 USB Charger
zł72.36
24h
Available quantity: 9
Available
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612