MP2636 Power Booster & Charger - LiPo charger module with MP2636 chip
ID: 565927
5902186312999
zł35.31
Tax included
zł28.71 tax excl.
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446
Description
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with a 5V output available on the USB Type A connector, so it can be used as a power bank. The battery is connected to the board via the JST PH2.0 connector or soldered to the pads, and the battery charging source via the microUSB connector. The charging status and the power output are indicated by the LED diodes on the board. The module has a small size, which makes it suitable for projects of small IoT devices.
Features
- Input voltage in charging mode (VIN): 4.5 to 6.0V
- Output voltage (VOUT): 5V
- Works with a 4.2V battery (3.7V lithium battery, 4.2V fully charged)
- Maximum charging current: 2.5 A
- Maximum output current: 2.5 A
- Switching frequency: 600KHz
- Charging Mode Efficiency:> 90%
- Boost Mode Efficiency:> 90%
- Protection against battery overcharging
- Overheating protection: 150 ℃
- Dimensions: 35 x 30 mm
- Weight: 12 g
565927
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 24
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 10
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
zł3.48
24h
Available quantity: 31
Available
2-wire cable, 30 cm long, with a JST PH-2.0 female plug at one end
zł2.20
24h
Available quantity: 34
Available
Other products in the same category (16)
LiPo 3.7 V battery charger module with a microUSB socket. DFRobot DFR0667
zł27.22
24h
Available quantity: 2
Available
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
zł33.73
24h
Available quantity: 3
Available
Compact charger module that allows you to power your electronics projects from USB-C, DC power (5-18V) or solar panel. Supports various cell types (LiIon, LiPoly, LiFePO4) and offers a choice of charging currents (250mA, 500mA, 1A), automatically optimizing energy harvest from solar panels without the need for an additional MPPT. With built-in power path management, status LEDs and regulated LOAD output (up to 4.5V), it is ideal for mobile and energy-independent projects. Adafruit 6091
zł35.41
4 weeks
No product available!
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
zł25.55
24h
Available quantity: 8
Available
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
zł21.71
24h
Available quantity: 6
Available
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł23.86
24h
Available quantity: 1
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł14.85
24h
Available quantity: 6
Available
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
zł38.60
24h
Available quantity: 5
Available
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł25.30
24h
Available quantity: 3
Available
PRT-10217 - LiPo Charger Basic - Micro-USB
zł69.09
24h
Available quantity: 1
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł14.10
24h
Available quantity: 15
Available
The charger module is designed for 2 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł23.00
24h
Available quantity: 10
Available
3.7V li-ion battery charger based on TP4056 chip equipped with USB type C connector. HW-373
zł2.80
24h
Available quantity: 294
Available
A versatile and compact 3.3V power solution, ideal for IoT and mobile device projects. It combines a functional LiIon/LiPo battery charger with a TPS62569 buck converter, providing a stable 3.3V from multiple sources – USB, DC (up to 18V) or solar panel. With PV charging optimization, Power Path and LED indication, the board provides reliable power without the need for additional modules. Adafruit 6092
zł45.58
24h
Available quantity: 1
Available
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612
zł41.72
4 weeks
No product available!
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
zł7.01
4 weeks
No product available!
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446