

4-in-1 module designed for 18650 Li-Ion batteries. It can be used as:
There are SW pads on the board, to which the switch can be connected (in power source mode). When operated as a UPS, the SW pads should be short-circuited.
The module will be widely used, both as a charger for mobile devices and a backup source that maintains power.
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
The XTAR VC2 charger is a two-channel charger for lithium-ion (Li-ion) cells with a micro USB charging input. Each channel is independent. The VC2 has a large LCD screen showing charging voltage and current. The charger also shows the capacity that is delivered to the cell and displays the result on the screen
No product available!
The charger is designed to charge R6/AA and R03/AAA NiMH batteries. It allows you to simultaneously charge 2 or 4 batteries. Panasonic BQ-CC51
A handy set with a charger to build a Power Bank based on 18650 batteries. The set does not include a battery.
Fast XTAR SC1 processor charger for lithium-ion cells in sizes 18650, 18700, 20700, 21700, 22650, 26650. It is equipped with LEDs showing the state of charge, three-stage charging processor TC / CC / CV, function of reacting deeply discharged cells, security: short-circuit, thermal, against reverse polarity. It can be charged with any USB power charger (min. 2.1A)
Charger module with a basket for a CR123A battery dedicated to micro:Maqueen robots. DFRobot FIT0611
Two-channel processor charger designed for Li-Ion cylindrical batteries in various sizes (including 18650). It can charge batteries both with PCM protection and without protection. The nominal charging current in the main phase is 0.5A per channel. XTAR MC2
Lithium battery charger module with a maximum current of 3 A. Equipped with a USB type C connector. Dedicated to charging one Li-Ion cell
XTAR MC2+ is a compact, dual-channel charger for lithium-ion batteries, such as 18650, that automatically adjusts the charging current to the cell condition. Thanks to the "Zero Volt Activation" function, it can reactivate deeply discharged cells, and power supply via the micro-USB port provides convenience and mobility.
Kit containing the Panasonic Eneloop BQ-CC55 charger and 4 Panasonic Eneloop R6/AA rechargeable batteries with 2000 mAh capacity. Panasonic K-KJ55MCC40E
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
Li-Ion battery charger dedicated for Yato 18V systems. It is perfectly matched to batteries with capacities from 2000 mAh to an impressive 6000 mAh, ensuring a full charge in just 1 to 3 hours. Yato YT-82848
No product available!
Kit containing the Panasonic Eneloop BQ-CC55 charger and 4 Panasonic Eneloop Pro R6/AA rechargeable batteries with 2500 mAh capacity. Panasonic K-KJ55HCD40E
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module