Li-ion battery charger module with TP4056 chip and microUSB connector
ID: 562280
5906623455461
zł2.10
Tax included
zł1.71 tax excl.
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply
Description
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 chipset, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply.
properties
- Charger module with TP4056
- Built-in LEDs signaling the charging process and full charging
- Supply voltage: 4 - 8 V DC from external power supply or 5V through microUSB connector
- Maximum charging voltage: 4.2 V
- Maximum charging current: 1 A
- Power consumption without load: 2 mA
- Power consumption from the connected cell (after disconnecting the charger): max. 6 μA
- Through-solder pads for connecting the cell and power supply
- Charges lithium-ion cells in CC / CV mode
- Dimensions: 23 x 17 x 4 mm
562280
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The power supply module with the LiPo battery charging circuit, designed for the Wemos D1 Mini boards
zł8.24
24h
Available quantity: 2
Available
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector
zł33.01
24h
Available quantity: 3
Available
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
zł26.27
24h
Available quantity: 2
Available
SkyRC iMax B6 V2 is an advanced 60W charger that can charge, discharge and balance LiPo, LiHV, NiCd, NiMH, AGM and Pb batteries up to 6S with a current of up to 6A. Equipped with automatic battery parameter detection and overload and overheat protection, it is an ideal choice for modelers and RC enthusiasts thanks to its compact size and intuitive interface.
zł163.17
24h
Available quantity: 1
Available
MPPT charge controller module for photovoltaic systems. It supports battery charging with 18V and 3A current, it can charge Lead Acid batteries.
zł28.88
24h
Available quantity: 38
Available
Available
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
zł30.65
24h
Available quantity: 3
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł15.65
24h
Available quantity: 4
Available
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
zł38.60
24h
Available quantity: 5
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł14.30
4 weeks
No product available!
The charger module is designed for 2 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł22.46
4 weeks
No product available!
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
zł6.69
4 weeks
No product available!
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
zł24.69
24h
Available quantity: 10
Available
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612
zł41.72
24h
Available quantity: 9
Available
The charger module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł25.20
4 weeks
No product available!
PRT-10217 - LiPo Charger Basic - Micro-USB
zł69.09
24h
Available quantity: 1
Available
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply