Lipo Rider Plus - LiPo charger module with 5V/2.4A output
ID: 1178625
5906623414864
zł29.27
Tax included
zł23.80 tax excl.
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with a 5V / 2.4A output available on a USB Type A connector, so it can be used as a power bank. The battery is connected to the board via the JST PH2.0 connector, and the battery charging source via the USB type C connector. Charging status and power outputs are indicated by LEDs on the board. The module has a small size, which makes it suitable for projects of small IoT devices.
Features
- Input voltage in charging mode (VIN): 5V
- Output voltage (VOUT): 5V
- Works with LiPo battery
- Maximum charging current: 2 A
- Maximum output current: 2.4 A
- 3.3 V, 200 mA output on goldpin connectors
- Protection against battery overcharging
- LED indicator
- Output power switch
- Dimensions: 25 x 41 mm
1178625
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.10
24h
Available quantity: 29
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 19
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.77
24h
Available quantity: 35
Available
Other products in the same category (16)
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
zł37.82
24h
Available quantity: 2
Available
Available
The charger module is designed for 5 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł24.70
24h
Available quantity: 8
Available
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Adafruit 2124
zł26.75
24h
Available quantity: 3
Available
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
zł25.87
24h
Available quantity: 9
Available
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł24.70
24h
Available quantity: 6
Available
LiPo 3.7 V battery charger module with USB type C socket. SparkFun PRT-15217
zł50.50
24h
Available quantity: 2
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł16.20
24h
Available quantity: 7
Available
Available
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
zł142.31
24h
Available quantity: 1
Available
SkyRC iMax B6 V2 is an advanced 60W charger that can charge, discharge and balance LiPo, LiHV, NiCd, NiMH, AGM and Pb batteries up to 6S with a current of up to 6A. Equipped with automatic battery parameter detection and overload and overheat protection, it is an ideal choice for modelers and RC enthusiasts thanks to its compact size and intuitive interface.
zł275.57
24h
Available quantity: 2
Available
3.7V li-ion battery charger based on TP4056 chip equipped with USB type C connector.
zł2.71
24h
Available quantity: 78
Available
The charger module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł24.70
24h
Available quantity: 2
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł17.47
24h
Available quantity: 4
Available
Charger module dedicated to single-purpose LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM611
zł30.91
24h
Available quantity: 7
Available
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
zł16.59
24h
Available quantity: 5
Available
Single-purpose LiPo charger module based on the ETA9740 chip. It has an integrated power management circuit with 5V and 2.4A output. Seeed Studio 106990290