

Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a consumption of up to 1 A. The input voltage of the module is in the range from 3 to 6 V. The module is powered via the USB type C connector or via the VIN and GND pins. There are two LEDs on the board, signaling the charging status and the end of the process. The module is equipped with an overvoltage protection. It will be used in a wide range of products, including solar panels, audio equipment and portable devices.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Cables for evaluation boards, set of 10 pcs., blue colour
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
Li-Ion 18650 battery with a nominal voltage of 3.7V and a capacity of 2600mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Li-Ion 18650 battery with a nominal voltage of 3.6V and a capacity of 3500mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
The power supply module with the LiPo battery charging circuit, designed for the Wemos D1 Mini boards
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612
PRT-10217 - LiPo Charger Basic - Micro-USB
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
No product available!
Solar energy management module designed for solar panels with a voltage from 6 V to 24 V. Waveshare Solar Power Manager (EN)
USB charger equipped with XT60 input socket. It can be powered by Lipo 2-6S batteries. AOKoda QC3.0 USB Charger
No product available!
Compact charger module that allows you to power your electronics projects from USB-C, DC power (5-18V) or solar panel. Supports various cell types (LiIon, LiPoly, LiFePO4) and offers a choice of charging currents (250mA, 500mA, 1A), automatically optimizing energy harvest from solar panels without the need for an additional MPPT. With built-in power path management, status LEDs and regulated LOAD output (up to 4.5V), it is ideal for mobile and energy-independent projects. Adafruit 6091
Charger module for Li-Ion batteries based on the TP4056 system. It can supply current up to 1 A. The input voltage of the module ranges from 4.5 to 8 V. It has a built-in Step Up converter
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
MPPT charge controller module for photovoltaic systems. It supports battery charging with 18V and 3A current, it can charge Lead Acid batteries.
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
No product available!
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
No product available!
SkyRC iMax B6 V2 is an advanced 60W charger that can charge, discharge and balance LiPo, LiHV, NiCd, NiMH, AGM and Pb batteries up to 6S with a current of up to 6A. Equipped with automatic battery parameter detection and overload and overheat protection, it is an ideal choice for modelers and RC enthusiasts thanks to its compact size and intuitive interface.
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector