

The charger module is designed for 5 Li-Ion cells. It has protection against excessive discharge. It is equipped with a micro USB and USB Type-C connector and supports quick charging (QC) with a voltage of 5 to 12 V. The charger module is an ideal solution for people who need reliable and precise control over Li-Ion batteries. The module allows, among other things, to balance the voltage between individual battery cells, control the charge and discharge voltage, as well as monitor the temperature, which allows you to avoid excessive discharge, overcharging, overheating and short circuit. It is able to detect a failure and turn off the battery in order to protect devices and avoid damage to the battery. To monitor the temperature, it is necessary to connect an external NTC sensor and unsolder the resistor marked as NTC.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The charger module is designed for 2 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
The charger module is designed for 3 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
The charger module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
PRT-10217 - LiPo Charger Basic - Micro-USB
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
No product available!
Charger module for two cells of Li-Ion batteries. It can charge with a current of up to 0.55 A with a charging voltage of 8.4 V. Powered by a USB type C connector
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
No product available!
Module with a single-purpose LiPo charger with adjustable charging current in the range from 15 to 500 mA. It is equipped with a JST PH connector, pins and a 2450 type socket. SparkFun PRT-14380
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
No product available!
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
No product available!
The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.
SkyRC iMax B6 V2 is an advanced 60W charger that can charge, discharge and balance LiPo, LiHV, NiCd, NiMH, AGM and Pb batteries up to 6S with a current of up to 6A. Equipped with automatic battery parameter detection and overload and overheat protection, it is an ideal choice for modelers and RC enthusiasts thanks to its compact size and intuitive interface.
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
No product available!
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
Solar energy management module designed for photovoltaic panels. It allows you to charge LiPo 1S batteries with a rated voltage of 3.7 V
No product available!
A boost charger module that allows you to charge batteries from USB, DC, or solar panels, and power devices requiring 5V. Equipped with the BQ25185 and TPS61023, it provides high efficiency, optimized power consumption, and support for 500mAh or larger batteries. Adafruit 6106
No product available!
LiPo 3.7 V battery charger module with USB type C socket. SparkFun PRT-15217
The charger module is designed for 5 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).