zł10.39 tax excl.
The DC charging and discharging module provides a stable 5V output with a maximum load current of 2A, regardless of the connected device. Equipped with a charge level indicator, push-button control and battery protection, it is suitable for projects such as DIY power banks, driving recorder power supply or charging mobile devices. DFRobot DFR1026
DC Charging and Discharging Module is an integrated solution that offers a stable 5V output with a maximum load current of 2A. The 5V output remains constant regardless of the connected load. The module features a 4-level charge/discharge indicator, button control, and an integrated power management system that boosts the lithium battery voltage to 5V. It supports simultaneous charging and discharging, and with built-in battery protections, it is compatible with batteries lacking internal protection circuits.

The module is suitable for various projects, including upgrading vehicle charging systems, powering dash cams, building portable DIY power banks, and charging mobile phones or laptops.
Note!
The button (KEY) function is inactive during charging. In discharging mode, a short press activates the output and the indicator, while a long press (approximately 10 seconds) deactivates the output and turns off the indicator. The indicator automatically turns off after 35 seconds of inactivity. When simultaneously charging and discharging, both input and output must be activated to maintain balance and extend the module’s lifespan.
Data sheet
Manufacturer
Responsible person
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446
DC-DC Step-Up converter U3V40F9 with an output voltage of 9 V, an input voltage of 1.3 to 9 V and a maximum output current of 4 A. Pololu 4015
DC-DC Step-Up converter U3V40F12 with an output voltage of 12 V, an input voltage of 1.3 to 12 V and a maximum output current of 4 A. Pololu 4016
Voltage converter module with symmetrical output ±19 V and 2x 9,5 V with a maximum power of 200 W. Used, among others, to power audio amplifiers
Module with a step-up converter with an input voltage from 10 V to 32 V and an adjustable output voltage from 15 V to 32 V. It has a maximum power of 150 W
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 15 V and a maximum input of up to 2 A. Pololu 4946
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 12 V and a maximum input of up to 2 A. Pololu 4945
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 9 V and a maximum input of up to 2 A. Pololu 4944
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 7.5 V and a maximum input of up to 2 A. Pololu 4943
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 6 V and a maximum input of up to 2 A. Pololu 4942
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 5 V and a maximum input of up to 2 A. Pololu 4941
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 3.3 V and a maximum input of up to 2 A. Pololu 4940
A cable with a built-in converter that increases the voltage from the USB connector to 12 V. It is equipped with a DC Jack 2.1 x 5.5 mm plug
A cable with a built-in converter that increases the voltage from the USB connector to 9 V. It is equipped with a DC Jack 2.1 x 5.5 mm plug
DC-AC converter, also referred to as an inverter. Converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V
DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 110 V, 200 V, 220 V or 280 V
DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V, 380 V or 18 V
The DC charging and discharging module provides a stable 5V output with a maximum load current of 2A, regardless of the connected device. Equipped with a charge level indicator, push-button control and battery protection, it is suitable for projects such as DIY power banks, driving recorder power supply or charging mobile devices. DFRobot DFR1026