

PRT-10217 - LiPo Charger Basic - Micro-USB
Description:
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells at a rate of 500mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery.
The board incorporates a charging circuit, status LED, connector for your battery (JST-type used in the batteries we carry), and a micro-USB connector. A small mounting hole allows this charger to be easily embedded into a project.
Note: This version uses a micro-USB cable. We also have this charger with a mini-USB connection as well.
Documents:
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The module allows you to charge lithium-ion batteries (one cell) with 1A current. Thanks to the applied TP4056 scaler, the charger fully controls the process of charging the cell, is safe and can be powered from the microUSB connector or from an external power supply
The 3.3V and 5V power supply module is a versatile solution for projects requiring power at different voltage levels, ideal for microprocessor and sensor systems. Compatible with breadboards, it supports 6V - 12V input and offers simultaneous 3.3V and 5V outputs, providing stable power for a variety of components.
4-in-1 module designed for 18650 Li-Ion batteries. It can be used as a 5 V voltage source, charger, UPS and battery protection module
MPPT charge controller module for photovoltaic systems. It supports battery charging with 12V and 3A current, it can charge Lead Acid batteries.
The Li-Ion battery charger module is designed to work with solar panels. The charger can supply a current of up to 500 mA. The module input voltage is in the range of 4.4 to 6 V.
Extension module with Li-Ion and LiPo charger dedicated to QT Py boards. It allows you to charge the batteries with a current of up to 200 mA. Adafruit 5397
A boost charger module that allows you to charge batteries from USB, DC, or solar panels, and power devices requiring 5V. Equipped with the BQ25185 and TPS61023, it provides high efficiency, optimized power consumption, and support for 500mAh or larger batteries. Adafruit 6106
No product available!
Charger module dedicated to single-purpose LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM611
Compact charger module that allows you to power your electronics projects from USB-C, DC power (5-18V) or solar panel. Supports various cell types (LiIon, LiPoly, LiFePO4) and offers a choice of charging currents (250mA, 500mA, 1A), automatically optimizing energy harvest from solar panels without the need for an additional MPPT. With built-in power path management, status LEDs and regulated LOAD output (up to 4.5V), it is ideal for mobile and energy-independent projects. Adafruit 6091
Single-purpose LiPo and Li-Ion charger module based on the MP2636 chip. It has an integrated power management circuit with 5V output. DFRobot DFR0446
MPPT charge controller module for photovoltaic systems. It supports battery charging with 18V and 3A current, it can charge Lead Acid batteries.
Charger with LCD display designed for solar panels. It can work with 12 V and 24 V systems, has a 30 A output and two 2.5 A USB outputs. Designed for lead-acid batteries
Charger module with protection dedicated to LiPo and LiIon batteries. Equipped with a JST-PH battery connector and a USB Type-C charging connector. Pimoroni PIM612
The Adafruit Micro-Lipo charger is designed to charge lithium-polymer or lithium-ion (LiPoly / LiIon) batteries via a USB Type-C connector. It performs charging in 3 stages: pre-charging, fast charging with constant current and maintenance charging with constant voltage.
LiPo and LiFePO4 battery charger module based on the TP5000 chip. It can handle batteries charged with 4.2 V and 3.6 V with the default charging current of 1 A
No product available!
USB charger equipped with XT60 input socket. It can be powered by Lipo 2-6S batteries. AOKoda QC3.0 USB Charger
MPPT charge controller module designed for photovoltaic systems. It can charge one lithium-polymer cell, and thanks to MTTP technology, optimal charging parameters are used for the prevailing conditions. SparkFun PRT-12885
No product available!
PRT-10217 - LiPo Charger Basic - Micro-USB