- Out-of-Stock
Triple Axis Accelerometer - a module with a 3-axis MMA8452Q accelerometer
ID: 584874
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756
Description
Module with a 3-axis MMA8452Q accelerometer. The system has a user-configurable measurement scale of ±2g/±4g/±8g with high-pass filtered data as well as unfiltered data available in real time. The device can be configured to generate interrupt signals, allowing you to monitor events and remain in a low-power mode during idle periods. The MMA8452Q can send data with a resolution of 12 bits and a frequency of up to 800 Hz. There are holes on the board with a 2.54 mm raster. The module is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. The product page includes the user manual and the Arduino library.
Features
- Range ±2g/±4g/±8g selectable dynamically
- Data transmission frequency (ODR) from 1.56 Hz to 800 Hz
- 12-bit and 8-bit digital output
- Digital I2C interface (works up to 2.25 MHz with 4.7 kΩ pull-up)
- I2C address: 0x1D (default), 0x1C
- Two programmable interrupt pins for six interrupt sources
- Three built-in motion detection channels
- Orientation detection with set hysteresis
- Real-time high-pass filter data
- Supply voltage from 1.95 V to 3.6 V
- Interface voltage 1.6 V to 3.6 V
- Current consumption: 6 μA to 165 μA
584874
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 12333
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 308
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 357
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 9
Available
Module with the 3-axis MMA8452Q accelerometer. The system has a user selectable measurement scale of ±2g/±4g/±8g. There are two Qwiic connectors on the board and holes with 2.54 mm raster. SparkFun SEN-14587
zł73.01
24h
Available quantity: 1
Available
Other products in the same category (16)
Siglent SDG2042X is a high-quality dual-channel function generator that combines advanced technology with ease of use. With a wide range of features, including TrueArb and EasyPulse, and precise signal processing, it is an ideal tool for engineers, technicians, and scientists who need a reliable device for signal generation and analysis across various applications. Siglent SDG2042X
Retired
No product available!
The Siglent SDG1032X, featuring a 30 MHz maximum output frequency and two output channels, is an indispensable function generator for engineers and technicians. With a sampling rate of 150 MSa/s, 16kpts memory, and 16-bit vertical resolution, this device provides high precision and reliability. Its compact design, along with standard USB and LAN interfaces and an optional GPIB, facilitates seamless integration into measurement systems and automation of tasks. Siglent SDG1032X
Retired
No product available!
ToolkitRC Q6AC is a versatile modeling charger that supports up to four batteries at a time, compatible with LiPo, LiFe, Li-Ion, NiMH and Pb cell types. It provides up to 400W of power when powered by AC mains and up to 1000W when powered by DC external power, and also offers fast charging via USB-C PD (65W) and USB-A Fast Charge (18W) ports.
Retired
No product available!
USB-UART converter with four isolated UART ports with built-in isolation of 1.5kV/3kV. It guarantees data transmission speeds of up to 12 Mbps and the ability to work with 1.8 V or 3.3 V voltage systems on the UART side. It is equipped with a USB Type C connector and is capable of operating in a wide temperature range from -40°C to +55°C. Electronic Prototypes EPED001A-10-STD
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R6S minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6S
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 4 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R5C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3568B2 processor, 2 GB of LPDDR4x RAM and 32 GB eMMC memory. It supports microSD cards and works with operating systems such as FriendlyWrt, Android, Debian. FriendlyELEC NanoPi R5C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor and 4 GB of LPDDR4x RAM. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
NanoPi R6C minicomputer designed by FriendlyElec. It is equipped with a Rockchip RK3588S processor, 8 GB LPDDR4x RAM and 32 GB eMMC Flash memory. Supports booting from microSD cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu, etc. FriendlyELEC NanoPi R6C
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Pro
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 300 x 300 x 400 mm and uses a fully metal hotend. It allows printing at a speed of 300mm/s, which translates into 30% faster printing compared to previous versions of Sidewinder printers. Artillery Sidewinder X3 Plus
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large working space of 240 x 240 x 260 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Pro
Retired
No product available!
3D printer with automatic table leveling and printing resume function. Equipped with a double Z axis and a filament sensor. It offers a large workspace of 300 x 300 x 400 mm and uses a full metal hotend and a dual gear extruder. It allows printing at a speed of 500mm/s. Artillery Sidewinder X4 Plus
Retired
No product available!
Module with a 3-axis MMA8452Q accelerometer. The system has a configurable measurement scale of ±2g/±4g/±8g. It is supplied with the voltage from 1.95 to 3.3 V and communicates via the I2C interface. SparkFun SEN-12756