- Out-of-Stock
Filament ROSA3D PLA Starter 1.75mm Glow in the Dark Blue
ID: 587754
5907753130976
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Blue
Description
1.75 mm PLA filament for 3D printing by ROSA3D. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary. Filament PLA Starter Glow in the Dark Green has a unique property - it can glow in the dark. It is enough to expose it under natural or artificial light in advance to emit a phosphorescent, blue glow in the dark.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA is the basic material used in 3D printing. PLA Starter is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food.
Features
- Color: Glow in the Dark Blue
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.5 kg
587754
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,5 kg
- Diameter
- 1,75 mm
- Colour
- Blue
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 27
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 261
Available
3D printer with two extruder and a heated table. It is fully assembled and ready to use. Flashforge Creator Pro 2
Regular pricezł5,292.28zł3,999.00
24h
Available quantity: 1
Available
Other products in the same category (16)
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
Retired
No product available!
The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT
Retired
No product available!
The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117
Retired
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway
Retired
No product available!
Alkaline battery A27 12V 7.6x27.3 mm with a capacity of 25 mAh
Retired
No product available!
Black ABS ESD filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy ABS ESD Black
Retired
No product available!
Graphic display 128 x 64 pixels, 68.7 x 48.5 mm, Type: COG, FSTN, reflective (without backlight), ST7565R. Artronic LCD-AG-C128064CF-FGN NO/-E6
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a BC2 tip
Retired
No product available!
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56
Retired
No product available!
3DDescriptionprinter with the function of auto-leveling the bed, resuming printing and filament sensor. A kit for self-assembly. Anet ET4
Retired
No product available!
3D printer with the function of auto-leveling the bed, resuming printing and filament sensor. A kit for self-assembly. Anet ET4 PRO
Retired
No product available!
Universal EEPROM, Flash NAND, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. TL866II Plus
Retired
No product available!
Universal EEPROM and Flash serial memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. SOFI SP8-A
Retired
No product available!
Set of 10 900M-T-BLACK tips for Aoyue, Repro, Zhaoxin, Xytronic, Quick WEP soldering stations. In this set you will find the most useful tips to improve the work of soldering. Tapered bits, chisels, chamfered and specialized bits.
Retired
No product available!
Cable with USB type A and USB type B 3.0 plugs, cable length 0.5 m, black. Delock 85065
Retired
No product available!
Cable with USB type A and USB type B 3.0 plugs, cable length 1 m, black color. Delock 85066
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Blue