- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
Filament ROSA3D ASA 1.75mm Green
ID: 587785
5907753130563
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Green
Description
ASA filament (acrylonitrile-styrene-acrylic) for 3D printing with a diameter of 1.75 mm by ROSA3D. 0.7 kg of filament is wound on the spool. The recommended printing temperature is in the range of 220°C to 250°C, and the temperature of the bed during printing is in the range of 90°C to 110°C. The manufacturer recommends printing in a closed chamber.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. ASA filament from Rosa3D is resistant to UV radiation, moisture and heat. It will find applications in the automotive, marine and outdoor industries such as mirror housings, covers, radiator covers and sensor housings.
ASA filament is a suitable material for outdoor applications that will be intensely exposed to the sun and various weather conditions. It is ideal when the user needs an efficient material that will be less problematic than printing from ABS. The filament has less shrinkage and the vapors produced are much less noticeable. The softening point of ASA prints is higher compared to PLA and PET-G, there are no signs of deformation up to the temperature of about 94°C.
Features
- Color: Green
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 250°C
- Bed temperature: 90°C to 110°C
- It is recommended to print in a closed chamber
- Density 1.07 g/cm3
- Odor: almost odorless
- Elongation at tensile 35%
- Tensile strength (to break) 40 MPa
- Tensile modulus 1750 MPa
- Impact strength according to the Izod method with a notch 45 kg*cm/cm
- Heat deformation temperature 94°C
- Net weight: 0.7 kg
587785
Data sheet
- Rodzaj filamentu
- ASA
- Ilość filamentu
- 0,7 kg
- Diameter
- 1,75 mm
- Colour
- Green
You might also like
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.02
24h
Available quantity: 82
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł56.14
24h
Available quantity: 23
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł49.48
24h
Available quantity: 154
Available
Other products in the same category (16)
Alphanumeric display OLED 4x20, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH002004AB
Retired
No product available!
Alphanumeric display OLED 4x20, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH002004AW
Retired
No product available!
Printed circuit board to secure - a simple car lock. AVT3187 A
Retired
No product available!
AVT kit for self-assembly protection - a simple car lock. AVT3187 B
Retired
No product available!
Printed circuit board for vapor extraction controller. AVT3215 A
Retired
No product available!
AVT kit for self-assembly of a vapor extraction controller. AVT3215 A
Retired
No product available!
Assembled fume extraction controller. AVT3215 C
Retired
No product available!
No product available!
No product available!
Development board with 8-core SoC chip Samsung Cortex-A53 Octa Core S5P6818 1.4GHz with built-in Ethernet, HDMI, camera interface and LCD display. The board includes a USB port, a serial port and a 40-pin GPIO connector. FriendlyELEC NanoPi Fire3
Retired
No product available!
NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 256MB RAM
Retired
No product available!
NanoPi NEO Core2, Allwinner H5 Quad-Core 1.5Ghz + 1GB RAM + 8GB eMMC, without soldered GPIO pins
Retired
No product available!
NanoPi NEO Core is a small PCB equipped with the SoC Allwinner H3 chip and 512MB RAM. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C, I2S interface. The board can be powered from the Micro USB connector. FriendlyELEC NanoPi NEO Core
Retired
No product available!
NanoPi NEO Plus 2 single board computer (SoC) with Allwinner H5 processor Quad-Core 1GHz + 1GB RAM + 8GB eMMC, SoC (ARM Cortex A-53)
Retired
No product available!
A small minicomputer with the SoC Allwinner H5 quad-core system (ARM Cortex-A53). The system has a built-in 16-core Mali450 graphics coprocessor. The computer is equipped with 512 MB DDR3 RAM. There are images of UbuntuCore and Armbian systems available for the computer. NanoPi NEO2
Retired
No product available!
NanoPi Duo is a small PCB equipped with the SoC Allwinner H2+ system, RAM memory with a capacity of 256 MB and a built-in Wi-Fi module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. The set is perfect for light IoT applications
Retired
No product available!
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Green