- Out-of-Stock
Filament ROSA3D PET-G Standard 1.75mm Gray
ID: 587796
5907753130327
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gray
Description
1.75 mm PET-G filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 220°C to 260°C, and the temperature of the bed during printing in the range of 60°C - 80°C.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PET-G Standard dedicated to people who deal with amateur and professional 3D prints. It will be used in the creation of prototypes and large-format prints.
Filament PET-G Standard from ROSA3D is characterized by the ease of printing comparable to PLA. The details are characterized by precise details, good adhesion to the work table, odorlessness and a low level of shrinkage. Printouts are distinguished by high chemical resistance. They can be sanded, drilled, sawn, sanded, cut and painted without compromising the structural integrity of the component. The PET-G Standard filament is made of raw materials that are approved for contact with food.
Features
- Color: Gray
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 220°C to 260°C
- Bed temperature: 60°C to 80°C
- Density: 1.29 g/cm3
- Odorless: smell
- Elongation at tensile 5.5%
- Tensile strength (to break) 47 MPa
- Tensile modulus is 2980 MPa
- Impact strength according to the Izod method with a notch of 4.7 kJ/m2
- Vicat softening point 78 °C
- Net weight: 0.8 kg
587796
Data sheet
- Rodzaj filamentu
- PET-G
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Gray
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,999.00
24h
Available quantity: 1
Available
Easy PET-G filament in graphite with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Graphite
zł84.59
24h
Available quantity: 1
Available
Easy PET-G filament in pure transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Pure Transparent
zł84.60
24h
Available quantity: 2
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 61
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 262
Available
Other products in the same category (16)
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
Retired
No product available!
High quality XF-PLA filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
Retired
No product available!
High quality XF-PLA filament for 3D printer with 1.75 mm diameter. 1 kg of wire is wound on the spool.
Retired
No product available!
High quality XF-ABS filament for 3D printer with 3 mm diameter. 2 kg of wire are wound on the spool.
Retired
No product available!
High quality XF-ABS filament for 3D printer with 1.75 mm diameter. 2 kg of wire are wound on the spool.
Retired
No product available!
No product available!
Orange Pi is a computer with Allwinner A20 processor, 1 GB RAM, 1 Gb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x13 connector compatible with Raspberry Pi and a micro-SD card slot. The computer is equipped with a SATA interface.
Delivery date unknown
No product available!
Orange Pi Mini 2 is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 100 Mb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot.
Delivery date unknown
No product available!
Orange Pi 2 is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 100 Mb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot.
Delivery date unknown
No product available!
Orange Pi PC H3 Quad-core Learning Development Board Mali400MP2 GPU 1GB DDR3
Retired
No product available!
Orange Pi Plus is a computer with SoC Alwinner H3 (4 cores Cortex-A7, Mali400MP2 GPU), 1 GB RAM, 1 Gb Ethernet, WiFi 802.11 b / g / n. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x20 connector compatible with Raspberry Pi 2 and a micro-SD card slot, 8GB EMMC Flash
Delivery date unknown
No product available!
Development kit with TLV493D sensor. The board has a built-in J-Link programmer, XMC1100 microcontroller (Cortex-M0, 64kB Flash memory, 16kB RAM) and a three-plane magnetic field sensor TL493D. TLV493D-A1B6 2 GO KIT
Retired
No product available!
Arduino. 36 projects for electronics enthusiasts; Simon Monk
Retired
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard Gray