.png)
- Out-of-Stock
Filament ROSA3D PVB 1.75mm Smooth Turquoise
ID: 587909
5907753131607
ROSA3D filament made of high quality PVB. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVB Smooth Turquoise
Description
1.75 mm PVB filament for 3D printing by ROSA3D. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 200°C to 225°C, and the bed temperature during printing in the range of 65°C to 75°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and high accuracy of the diameter and roundness of the filament.
PVB filament (polyvinyl butyral) from ROSA3D is a polymer that allows you to obtain effective-looking, transparent prints. To achieve this effect, the surface of the finished printout is sufficient to treat with isopropyl alcohol (IPA). The ease of printing makes it suitable even for people starting their adventure with 3D printing. The material is characterized by low shrinkage and no odor. Thanks to the possibility of obtaining a transparent structure, it is perfect for printing a wide range of designer, single-walled items such as vases or lamp shades. Made of PVB, filled figures or sculptures, after surface treatment look as if they were removed from the injection mold.
Please note that PVB filament is hygroscopic. For this reason, it should be stored tightly closed and dried immediately before printing.
Features
- Color: Smooth Turquoise
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 200°C to 225°C
- Bed temperature: 65°C to 75°C
- Print speed: 60 to 80 mm/s
- Density 1.09 g/cm3
- Odorless smell
- Tensile modulus 2500 MPa
- Heat deformation temperature 55°C (HDT A according to ISO 75)
- Vicat softening temperature 70°C
- Charpy impact strength unnotched, 23°C: 106 kJ/m2; Notched, 23°C: 2 kJ/m2
- Net weight: 0.5 kg
587909
Data sheet
- Rodzaj filamentu
- PVB
- Ilość filamentu
- 0,5 kg
- Diameter
- 1,75 mm
- Colour
- Green
You might also like
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.02
24h
Available quantity: 85
Available
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Green
Delivery date unknown
No product available!
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 3
Available
Fiberlogy FiberSilk is the perfect choice for people who want their 3D prints to have a silky, metallic shine and an elegant finish. Thanks to the ease of printing typical of PLA and a rich palette of vivid colors, FiberSilk allows you to create unique and aesthetic 3D models that will dazzle with their appearance. Fiberlogy FiberSilk Bronze
zł109.00
Delivery date unknown
No product available!
Other products in the same category (16)
hb03w-p-000-00
Delivery date unknown
No product available!
No product available!
No product available!
Adafruit 2486 - NETduino 3 WiFi is an open source electronics platform using the .NET Micro Framework
Retired
No product available!
The Arduino M0 represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core.
Retired
No product available!
Arduino Yun Mini is a breadboard PCB developed with ATmega 32u4 MCU and QCA MIPS 24K SoC CPU operating up to 400 MHz. Qualcomm Atheros CPU supports a Linux distribution based on OpenWRT named Linino. The board has built- in WiFi, supports 20 digital input/output pins, a 16 MHz crystal oscillator, a micro USB connector, an ICSP header, two reset buttons and one user button.
Retired
No product available!
The Arduino 4 Relays Shield allows your Arduino driving high power loads that cannot be controlled directly by Arduino\'s digital pins. The Shield features four relays, each relay with 2 pole changeover contacts (NO and NC). Four LEDs indicate the on/off state of each relay. (A000110)
Retired
No product available!
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
Retired
No product available!
The Leonardo ETH is a microcontroller board based on the ATmega32U4 and the new W5500 TCP/IP Embedded Ethernet Controller (datasheet).
Retired
No product available!
The Arduino 9 Axes Motion Shield allows your Arduino to measure movement: orientation, acceleration and magnetic field. A000070
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
The Arduino GSM Shield connects your Arduino to the internet using the GPRS wireless network. Just plug this module onto your Arduino board, plug in a SIM card from an operator offering GPRS coverage and follow a few simple instructions. You can also make/receive voice calls (you will need an external speaker and microphone circuit) and send/receive SMS messages.
Retired
No product available!
Plastic holder that could fit all the boards with Arduino UNO size (68,6 mm x 53,4 mm). Contains 5 pieces in different colours. A000018
Delivery date unknown
No product available!
CryptoShield is a dedicated security peripheral for the Arduino. This shield adds specialized ICs that perform various cryptographic operations which will allow you to add a hardware security layer to your Arduino project. It also is a nice device for those performing embedded security research. DEV-13183
Retired
No product available!
No product available!
Banana Pi R1 acrylic clear case. The case needs to be assembled by yourself
Retired
No product available!
ROSA3D filament made of high quality PVB. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVB Smooth Turquoise