- Out-of-Stock
Filament ROSA3D PLA Starter 1.75mm Glow in the Dark Green
ID: 587755
5907753130969
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Green
Description
1.75 mm PLA filament for 3D printing by ROSA3D. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary. Filament has a unique property - it can glow in the dark. It is enough to expose it under natural or artificial light in advance to emit a phosphorescent, green glow in the dark.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA is the basic material used in 3D printing. PLA Starter is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food.
Features
- Color: Glow in the Dark Green
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.5 kg
587755
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,5 kg
- Diameter
- 1,75 mm
- Colour
- Green
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł52.90
24h
Available quantity: 31
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 261
Available
3D printer with two extruder and a heated table. It is fully assembled and ready to use. Flashforge Creator Pro 2
Regular pricezł5,292.28zł3,999.00
24h
Available quantity: 1
Available
Other products in the same category (16)
A 16-channel voltage recorder with a sampling rate of up to 1 MS/s. Connects to a computer via USB2.0 and works with PicoLog 6 software. Picolog 1216
Retired
No product available!
Bosch Sensortec\'s BME688 development kit enables testing of applications based on temperature, barometric pressure, humidity, and gas detection. The first AI-enabled environmental sensor, the BME688 can distinguish between different gas compositions by analyzing their "electronic fingerprints." The kit is configurable using BME AI-Studio software, which optimizes performance and power consumption, and the eight-sensor board enables testing of multiple configurations simultaneously. SparkFun DEV-19630
Retired
No product available!
No product available!
No product available!
No product available!
LTE Cat 4 module that supports wireless communication over LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS and EDGE technologies. SMA antenna included. Waveshare SIM7600E-H 4G Module (B)
Retired
No product available!
Antenna splitter that allows one GNSS antenna to be connected to two devices, such as the NEO-D9S correction data receiver and another GNSS module. The module, based on the BP2G1+ from Mini-Circuits, evenly splits the signal from the antenna port between two outputs, providing power to the active antenna and optionally switchable power supply. SparkFun SPX-21223
Retired
No product available!
Contact IPA Plus contains high purity isopropyl alcohol. Removes all contamination from optical elements. Leaves no traces or stains. AG Termopasty ART.AGT-290
Retired
No product available!
Module for wireless data transmission in LTE Cat. M1 and Cat. NB2. It supports GSM/EDGE communication and navigation within the GPS, BeiDou, GLONASS, Galileo systems. USR-MB706
Retired
No product available!
A universal developer for photovarnishes and positive plates is used as a product for developing photos. AG Termopasty ART.AGT-087
Retired
No product available!
Espressif\'s ESP32-S3-WROOM-1 WiFi and Bluetooth LE module board, offering 8 MB Flash memory and 8 MB PSRAM. Espressif Systems ESP32-S3-DevKitC-1-N8R8
Retired
No product available!
Assembly grease is a preparation that works well even in the most demanding conditions. AG Termopasty ART.AGT-214
Retired
No product available!
Data logger dedicated to monitoring and analysing electrical signals. Enables easy and precise data collection from a variety of sources, including power systems, industrial automation and other applications. Hantek 365A
Retired
No product available!
Data logger dedicated to monitoring and analysing electrical signals with True RMS functionality. Enables easy and accurate data collection from a variety of sources, including power systems, industrial automation and other applications. Hantek 365B
Retired
No product available!
Data logger dedicated to monitoring and analysing electrical signals with True RMS. It enables easy and precise data collection from a variety of sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and has built-in Bluetooth communication. Hantek 365D
Retired
No product available!
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from various sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and uses Bluetooth communication. It has iPad support. Hantek 365F
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Green