.png)
- Out-of-Stock
Fiberlogy Easy PLA filament 1.75mm Purple
ID: 588629
Easy PLA filament in Purple, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Purple
Description
Fiberlogy Easy PLA filament in Purple with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Recommended printing temperature should be in the range of 200°C to 220°C, while the table temperature in the range of 50°C to 70°C. When using pads or other adhesion enhancing agents, table heating is not required. The filament is wound on a spool and vacuum packed.
Fiberlogy is a Polish manufacturer of filaments for FFF/FDM 3D printers. The company has many years of experience in the processing of plastics. Fiberlogy filaments are characterized by high quality, innovation, great variety and are made of proven raw materials with the best parameters.
PLA filament is the basic filament used in 3D printing. It is characterized by good durability, and its properties allow precise printing of even complex elements. Easy PLA is a filament that allows you to get very good quality prints, avoiding printing problems. Thanks to its properties, Easy PLA material is recognized by both novice users and professionals. It is biodegradable and has very good adhesion between print layers.
The filament is available in different colors. It can be used to create prototypes, gadgets, toys and decorations.
Filament works great with most 3D printers available on the market. Check out our offer of 3D printers and choose the best set for you.
Features
- Purple colour
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.02 mm
- Oval tolerance: +0.01 mm
- Printing temperature: 200°C to 220°C
- Table temperature: 50°C to 70°C (when using pads or other adhesion promoters, table heating is not required)
- Net weight: 0.85 kg
- Total weight: 2.5 kg
588629
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,85 kg
- Diameter
- 1,75 mm
- Colour
- Purple
Manufacturer
- FIBERLAB SPÓŁKA AKCYJNA
- Brzezie 387
- 32-014 Brzezie
- Poland
- [email protected]
Responsible person
- FIBERLAB SPÓŁKA AKCYJNA
- Brzezie 387
- 32-014 387 Brzezie
- Poland
- [email protected]
You might also like
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Spray 400ml
zł56.14
24h
Available quantity: 35
Available
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł49.48
24h
Available quantity: 158
Available
FiberFlex 30D filament in Gray with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy FiberFlex 30D Gray
zł199.00
Delivery date unknown
No product available!
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 3
Available
Other products in the same category (16)
The assembled relay card programmed with sequences. AVT1998 C
Retired
No product available!
No product available!
Signal analysis kit including the Analog Discovery 2, Analog Discovery BNC adapter, BNC probes and necessary accessories. Digilent 240-123
Retired
No product available!
Braided tape designed to remove excess molten solder. 1.9 mm wide, 15 m long. CHEMTRONICS HQ-WICK-L5
Retired
No product available!
The ZYBO Z7 board (Zynq Board) is a renewed version of the set containing the programmable system from the Xilinx Zynq-7000 - Z-7020 family. Also includes the Xilinx Zynq SDSoC Voucher. Academic version. Digilent 471-015
Retired
No product available!
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003
Retired
No product available!
SIM7600CE 4G HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom's SIM7600CE system. It has support for 4G / 3G / 2G / GSM / GPRS / GNSS. Waveshare SIM7600CE 4G HAT
Retired
No product available!
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
Retired
No product available!
1.8inch LCD for micro:bit is an overlay with LCD display. The screen has a resolution of 160x128 pixels. The module has a standard micro: bit interface. 1.8inch LCD for micro: bit
Retired
No product available!
The Akyga induction charger allows you to charge your smartphone wirelessly using induction. QI technology ensures its compatibility with the majority of popular smartphones available on the market. 5 V output voltage, current efficiency is 1A. Akyga AK-QI-01
Retired
No product available!
Universal Akyga USB car charger powered from the cigarette lighter socket. Supply voltage 12 / 24V, output voltage 5V / 1A. Akyga AK-CH-01
Retired
No product available!
Minicomputer with a dual-core processor (up to 2.0 GHz) and 4 GB of LPDDR3 RAM memory, 16 GB of eMMC Flash memory. It has a two-band WiFi 2.4G and 5G module. Supports GPU and VPU acceleration. It has video interfaces in the form of HDMI, as well as USB 3.0, USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyElec NanoPC-T4
Retired
No product available!
The module allows the measurement of atmospheric pressure in the range of 260 ... 1260hPa with a resolution of 0.02hPa. It has a built-in stabilizer and translator levels, so you can use it in systems supplied with voltage of 2.5 ... 5.5V. Pololu 2867
Retired
No product available!
Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-30PF
Retired
No product available!
Kit with heatsink and assembly elements for the NanoPC T4 minicomputer. FriendlyELEC NanoPC T4 Heat SInk
Retired
No product available!
Acrylic glass case designed for NanoPC T3 Plus and NanoPC T4 minicomputers. FriendlyELEC T4 & T3 PLUS Acrylic Case
Retired
No product available!
Easy PLA filament in Purple, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Purple