.png)
- Out-of-Stock
XUP-V2Pro
ID: 59730
Virtex-II Pro Development System
XUP-V2Pro - Virtex-II Pro Development System
Designed by the Xilinx University Program for all levels of Engineering Educational Programs
The Virtex-II PRO(V2-Pro) development system can be used at virtually any level of the engineering curricula, from introductory courses through advanced research projects. Based on the Virtex-II Pro FPGA, the board can function as a digital design trainer, a microprocessor development system, or a host for embedded processor cores and complex digital systems. It is powerful enough to support advanced research projects, but affordable enough to be placed at every workstation. The expansion connectors can accommodate special-purpose circuits and systems for years to come, so the board can remain at the core of an engineering educational program indefinitely (see below for a current list of available expansion boards).
The V2P is supported by world-class design tools, including ISE Foundation, Chipscope-Pro, Embedded Developer's Kit (EDK), and System Generator (WebPack cannot be used). Applications that include an embedded processor require EDK, and those that do not include a processor can use ISE. See the Xilinx University Program page for information on obtaining donations and/or academic discounts on design tools.
Digilent recommends that all users visit the Xilinx XUP V2-Pro webpage and view the most up to date documentation and reference designs. The Reference Design link contains projects for the VDEC-1 and contains many other useful designs.
NOTE: EDK version 9.2 Base System Builder does not fully support the V2Pro board. We recommend using EDK Version 9.1 or the newer Version 10.1. The V2Pro is a mature product. 10.1 Service Pack 3 supports this product except for the 512MB DIMM. Future Xilinx EDK versions will not.
Key Features:
- Virtex-2 Pro XC2VP30 FPGA with 30,816 Logic Cells, 136 18-bit multipliers, 2,448Kb of block RAM, and two PowerPC Processors
- DDR SDRAM DIMM that can accept up to 2Gbytes of RAM
- 10/100 Ethernet port
- USB2 port
- Compact Flash card slot
- XSGA Video port
- Audio Codec
- SATA, and PS/2, RS-232 ports
- High and Low Speed expansion connectors with a large collection of available expansion boards
Download:
- Virtex-II Pro Development System Reference Manual
- Virtex-II Pro Development System Schematic
- Base System Builder (BSB) Guide
Code: 6003-210-000
59730
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
Raspberry Pi Compute Module 3+ (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM, 8 GB eMMC memory. The module is equipped with a 200-pin SODIMM connector.
Retired
No product available!
Orange Pi 3 1GB is a mini-computer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 1GB RAM (LPDDR3), Mali T720 graphics. On the board you can run Android 7.0 and Linux (Ubuntu, Debian).
Retired
No product available!
Orange Pi 3 2GB is a mini-computer equipped with SoC Allwinner H6 (quad core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 2GB RAM (LPDDR3), Mali T720 graphics. On the board you can run Android 7.0 and Linux (Ubuntu, Debian).
Retired
No product available!
A small evaluation board with the nRF52840 (ARM Cortex-M4) system designed for projects related to Mesh networks. Adafruit 3999
Retired
No product available!
Orange Pi 3 1GB is a mini-computer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 1GB RAM (LPDDR3), Mali T720 graphics chip, 8GB eMMC memory. The board can run Android 7.0 and Linux.
Retired
No product available!
Orange Pi 3 2GB for minicomputer equipped with SoC Allwinner H6 (quad-core, frequency up to 1.8 GHz, 64-bit architecture, ARM Cortex ™ -A53 core). It has 2 GB of RAM (LPDDR3), a Mali T720 graphics chip, 8 GB of eMMC memory. The board can run Android 7.0 and Linux.
Retired
No product available!
Module with a UV ultraviolet light sensor VEML6075. Enables measurement of the level of UVA (320-400nm) and UVB (280-320nm) radiation. It communicates via the I2C bus. SparkFun SEN-15089
Retired
No product available!
SanDisk Extreme microSDHC memory card with a capacity of 32GB, maximum reading speed up to 100 MB / s, U3 UHD class
Retired
No product available!
SanDisk Extreme microSDXC memory card with a capacity of 64GB, maximum read speed up to 160 MB / s, Class 10, U3, V30
Retired
No product available!
SanDisk Ultra microSDXC memory card with a capacity of 64GB, maximum reading speed up to 80MB / s, Class 10 UHS-I
Retired
No product available!
SanDisk Ultra microSDHC memory card with a capacity of 16GB, maximum reading speed up to 80MB / s, Class 10 UHS-I
Retired
No product available!
No product available!
FPGA Evaluation Kit based on the XC7A50T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software. Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292-1
Retired
No product available!
FPGA Evaluation Kit based on the XC7A50T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292-1
Retired
No product available!
FPGA Evaluation Kit based on the XC7A100T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292
Retired
No product available!
FPGA Evaluation Kit based on the XC7A100T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292
Retired
No product available!
Virtex-II Pro Development System