![NFC card reader with USB interface NFC card reader with USB interface](https://kamami.pl/47248-large_default/nfc-card-reader-with-usb-interface.jpg)
![NFC card reader with USB interface NFC card reader with USB interface](https://kamami.pl/47248-large_default/nfc-card-reader-with-usb-interface.jpg)
zł95.38 tax excl.
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer. It does not require an external power supply, it is powered by a USB connector. Supports EM4100 and EM1402 cards at 125 kHz. It can read information from a distance of 5 to 15 cm.
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
RFID Reader/Transponder IC 13.56MHz ISO 14443 I2C, SPI, UART, -25..85C, VFQFN32, NXP
The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3
Adafruit 789 - Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer. JT308
The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics
The ID-20LA RFID reader from ID Innovations has an operating frequency of 125 kHz. It has a built-in antenna and pins with 2 mm spacing. Among other things, it is designed to work with the RFID USB Reader module. SparkFun SEN-11828
No product available!
Card with RFID tag for systems operating at 125 KHz. Provides the ability to read and write the ID number
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Module with RFID reader. It is equipped with a buzzer and communicates via UART or USB interface. SB Components 20669
Intelligent RFID identifier cooperating with iNode Control Point
The X-NUCLEO-NFC03A1 is an NFC card reader evaluation board based on CR95HF / ST25R95-VMD5T to enable expansion of the STM32 Nucleo boards
A small key ring with an RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number
No product available!
The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards
NFC reader with USB interface. It allows you to easily read data from an NFC/RFID card using a computer