Tagi UHF RFID - tag RFID 30mm x 16mm

Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291

Handheld RFID card reader enabling card duplication. It allows you to read data from one card and write it to the other

RFID identification key with dimensions of 40.5 mm x 32 mm x 4.2 mm, operating on the 13.56 MHz frequency. RFID Tag Key

Intelligent RFID identifier cooperating with iNode Control Point

Intelligent RFID identifier cooperating with iNode Control Point

The dynamic NFC / RFID tag with I2C bus and ISO 15693 RF interface in the SOIC8 housing has a built-in 64k EEPROM memory. Producer: STMicroelectronics

The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360

Module with RFID 125 KHz tag reader. It allows reading 125KHz RFID tags / cards (EM4100 standard) from a maximum distance of 7 centimeters. The module has a connector in accordance with the Grove standard. Seeed Studio 113020002

NFC module designed for Arduino. Meets the standards of reader mode, P2P mode and card emulation mode. The board has an integrated RF antenna. NXP OM5578/PN7150ARDM

Adapter for RFID reader (125 kHz). Works with ID-3LA, ID-12LA and ID-20LA series systems. SparkFun SEN-13030

Adafruit 364

WRL-14147

RFID card with dimensions 54 mm x 85.5 mm x 0.87 mm, working on the 13.56 MHz frequency. RFID Tag Card

Module with an RFID reader designed to work with the Raspberry Pi Pico. Equipped with an OLED display and a buzzer. SB Components 21192

Module with RFID reader. It is equipped with a buzzer and communicates via UART or USB interface. SB Components 20669

KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.