RFID Breakout - module with RFID reader

The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away. These can be read by almost any 13.56MHz RFID/NFC reader. Adafruit 360

WRL-14147

Intelligent relay cooperating with iNode Control ID

The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards

NFC module designed for Arduino. Meets the standards of reader mode, P2P mode and card emulation mode. The board has an integrated RF antenna. NXP OM5578/PN7150ARDM

Handheld RFID card reader enabling card duplication. It allows you to read data from one card and write it to the other

FSC-BP108 iBeacon is a durable and energy-efficient Bluetooth 5.1 tag with IP67 protection, supporting popular beacon formats and enabling remote configuration via a mobile app. It is suitable for localization systems, asset tracking, and proximity-based marketing.

M5Stack U107 is an evaluation board with an RF transceiver operating in the 840 MHz - 960 MHz band, designed for wireless communication in IoT systems. Thanks to its wide frequency range, this module is suitable for applications such as smart cities, remote measurements and security systems

A small key ring with an RFID tag for systems operating at 125 KHz. Provides the ability to read and write a unique ID number

ID Card 125khz

The module for the RFID reader (125 kHz) is equipped with a USB interface. Works with ID-3LA, ID-12LA and ID-20LA series systems. The selected RFID reader is simply plugged into the module\'s connectors. SparkFun SEN-09963

The ID-20LA RFID reader from ID Innovations has an operating frequency of 125 kHz. It has a built-in antenna and pins with 2 mm spacing. Among other things, it is designed to work with the RFID USB Reader module. SparkFun SEN-11828

The RFID / NFC transponder reader module (tags) works in the PN532 chip and is compatible with Arduino. Data is available via SPI, I2C or HSU (High Speed UART). Supplied with a RFID card and key ring. ELECHOUSE NFC MODULE V3

A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006

Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291

A set of RFID tags consisting of three key rings in different colors and two white cards. The tags operate at 125 kHz and comply with the EM4100 standard. Seeed Studio 110990035