- Out-of-Stock
OpenScope MZ is a USB/WiFi oscilloscope with a Waveform Generator and Logic Analyzer. What does that mean? It's a device that you connect to your computer (through WiFi or a USB cable) that allows you to acquire, analyze, visualize, and control signals from circuits, sensors, and other electronic devices. Unlike typical USB instruments, OpenScope MZ can also be programmed to run standalone like an Arduino or Raspberry Pi, but with high-speed precision analog and digital I/O. At the core of the OpenScope MZ is a powerful Microchip PIC32 MZ Processor. This processor has many resources that we took advantage of to enable the functionalities found on OpenScope MZ.
OpenScope MZ also comes with WaveForms Live, which is a free, open-source, JavaScript-based software that runs in a browser and is inspired by our extremely popular software tool, WaveForms 2015.
Using the OpenScope + WaveForms Live, you will be able to configure the OpenScope to be an Oscilloscope, a Function Generator, a Logic Analyzer, a Power Supply, and even a Data Logger.
Completely Open-Source!
We wanted to create OpenScope MZ to enable everyone to learn electronics. This means that we need to invite as many people as possible to contribute ideas and collaborate with others in order to accomplish our mission on accessibility. OpenScope MZ is designed to be as open-sourced as possible; therefore, the hardware, firmware, software, and the mechanical specifications will be made available to anyone who wants to change and/or improve upon the design.
Manufacturer
Responsible person
Easy-to-use retractable cable with USB type A plugs and micro-B type, the cable has a length of 73 cm
Acrylic housing designed for the MZ OpenScope device (410-324). It helps protect the device from damage to everyday use or during travel. Digilent 240-133
Module with FM receiver RDA5807M. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 107020049
No product available!
A module with a microphone for recognizing voice commands. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020312
No product available!
Module with driver for 64x32 or 32x16 LED matrix displays. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 105020013
No product available!
The module with an incremental encoder with channels A and B. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 103020030
No product available!
Module with a track ball that allows you to track the movement in 5 axes in the range of 360 °. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020091
No product available!
Module with a vibration motor and the ability to generate 123 different vibration modes. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020011
No product available!
Module with a dynamic NFC M24LR64E-R tag and an external antenna. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020070
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3450 mAh. Sanyo NCR18650GA
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3400 mAh. Panasonic NCR-18650B
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 2600 mAh. Sony/Murata US18650VTC5
No product available!
Li-Ion battery type 18650 with a nominal voltage of 3.6 V and a capacity of 2600 mAh. Sony/Murata US18650VTC5A
No product available!
Minicomputer with Allwinner H616 Cortex-A53 quad-core processor. It is equipped with a Mali G31 MP2 GPU and 1 GB of RAM. The set provides WiFi communication and Bluetooth 5.0. Orange Pi Zero2
No product available!
Minicomputer with 4-core Allwinner V40 ARM Cortex-A7 processor, Mali 400 MP2 GPU graphics card, 1 GB RAM, WiFi, BT 4.0 and numerous connectors. Banana Pi BPI-M2 Berry
No product available!
The kit is designed to work with Linux. It consists of the SoM (System on Module) Quark-N and the Atom-N expansion board. Seeed Studio 114992462
No product available!
Development board equipped with an ESP32 module and a 3.5-inch color touch screen. Seeed Studio 102991454
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with a camera, microphones, LCD display and microSD card slot. Everything is closed in a housing. Seeed Studio 102110425
No product available!
Open-source All-in-one Instrumentation. Digilent 410-324