- Out-of-Stock
Grove LED Matrix Driver v1.0 - module with the controller of LED matrix displays
ID: 583233
Module with driver for 64x32 or 32x16 LED matrix displays. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 105020013
Description
Module with the controller of LED matrix displays. It was based on the STM32F103C8T6 microcontroller and supports 64x32 and 32x16 LED displays, which are connected to the module via a 16-pin IDC connector.The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via the UART interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Supported symbols and graphic functions: dot, straight line, circle, character, string, number, emoji, picture
- Supported LED matrix 32 × 64 or 32x16
- Dual-color LEDs (green and red) and mixed color (yellow) supported
- Display connector: DBSTAR_HUB 08A
- UART interface
- Supply voltage: 3.3 V or 5 V
- Current consumption: 28 to 50 mA
- Dimensions: 46.5 x 44 mm
- Weight: 9 g
Kit contains
- Grove LED Matrix Driver v1.0 module
- Grove cable
583233
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł53.71
24h
Available quantity: 20
Available
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Other products in the same category (16)
A wireless energy consumption monitor with built-in memory, thanks to the analysis of daily consumption, can help reduce the cost of water consumption
Retired
No product available!
No product available!
No product available!
No product available!
Simple heater controller CO - differential thermometer. Self-assembly set
Retired
No product available!
The RoboClaw motor controllers from Ion Motion Control (formerly Orion Robotics) can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual quadrature decoders make it easy to create a closed-loop speed control system. This version can supply a continuous 7.5 A per channel (15 A peak).
Retired
No product available!
No product available!
No product available!
Pololu RP5/Rover 5 Expansion Plate RRC07A (Narrow) Solid Blue
Retired
No product available!
Thermally conductive tape used as a replacement for thermally conductive paste. They are very flexible and characterized by high compressibility. AG Termopasty ART.AGT-161
Retired
No product available!
SDR (Software Defined Radio) receiver that allows you to receive signals in the frequency range from 10 kHz to 1 GHz. It is ideal for both monitoring low frequencies and receiving signals on higher bands
Retired
No product available!
No product available!
Flexiforce Pressure Sensor A201 - 100lbs, Tekscan, RoHS
Retired
No product available!
No product available!
No product available!
No product available!
Module with driver for 64x32 or 32x16 LED matrix displays. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 105020013