.png)
- Out-of-Stock
Romeo BLE Quad - robot controller with STM32 and BT 4.0
ID: 563596
Romeo family evaluation kit with Bluetooth 4.0 module. It is based on the STM32F103RET6 microcontroller and has a built-in four-channel DC motor driver. DFRobot DFR0398
Description
Romeo family evaluation kit with Bluetooth 4.0 module. It has 10 digital pins, 5 analog pins and I2C and UART interfaces. It is based on the STM32F103RET6 microcontroller, which can operate at frequencies up to 72 MHz, has a built-in 512 KB of FLash memory and 64 KB of SRAM. The board has a four-channel motor controller (2 x HR8833 chip), making the set perfect as a platform for building a small 4WD robot controlled by a mobile application. All outputs are compatible with the Gravity standard, which facilitates the connection of additional sensors and modules. The board is compatible with Arduino and can be programmed using the Arduino IDE. Full documentation is available on the product Wiki page.
Features
- Possibility of programming in Arduino IDE
- Supports Bluetooth wireless communication / programming
- Supports Android and iOS applications (open source code)
- Supports AT commands for BLE configuration
- Firmware upgradeable
- Microcontroller: STM32F103RET6
- SRAM: 64 kB
- Flash: 512 KB
- Clock frequency: 72 MHz
- Bluetooth chip: TI CC2540 (Bluetooth 4.0)
- Communication range: 30 m
- Working voltage: 3.3V
- DC power supply: via USB or external 7V to 10V
- 4-channel DC motor driver
- Automatic switching of USB and external power
- Digital I / O pins: 10
- Analog pins: 5
- I2C, UART
- Dimensions: 67 x 42 mm
- Weight: 54 g
Kit contains
- Romeo BLE Quad controller
- 4 x JST PH2.0 4-pin cable for encoders
- 4 x JST PH2.0 4-pin motor cable
- 2 x PH2.0-2Pin to XH2.54-2Pin cable
563596
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Available
4WD car chassis construction kit. It can be used as a base for building a robot
zł31.72
24h
Available quantity: 1
Available
4WD car chassis construction kit. It can be used as a base for building a robot
zł41.03
24h
Available quantity: 5
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł2.87
24h
Available quantity: 30
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł3.39
24h
Available quantity: 16
Available
Aluminum platform for building a mobile robot. Numerous holes were made in the plate to facilitate the assembly of motors and electronics. The set is equipped with 4 TT motors and 4 Mecanum multidirectional wheels with a diameter of 60 mm
zł89.58
24h
Available quantity: 4
Available
Other products in the same category (16)
No product available!
No product available!
- The ODROID-XU4 includes the cooling fan by default. You might need this part when you want to replace the original cooling fan
Retired
No product available!
Pololu engine with 48 CPR encoder, with 4.4: 1 transmission, standard 12 V voltage and 2250 rpm. Pololu 3213
Retired
No product available!
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a high-power, 12V brushed DC motor combined with a 74.83:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 3591.84 counts per revolution of the gearbox’s output shaft. Pololu 3218
Retired
No product available!
This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor consists of a medium-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
Low-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 464.64 counts per revolution of the gearbox’s output shaft. Pololu 3262
Retired
No product available!
Wireless, precise pressure, temperature and humidity sensor with built-in event memory
Retired
No product available!
Wireless, precision, high accuracy pressure and temperature sensor with built-in event memory
Retired
No product available!
Wireless, precision temperature sensor with high accuracy with built-in recorder and K-type thermocouple up to 260 ° C
Retired
No product available!
Compact servo designed for use in the Bolide Y-01 Advanced Humanoid Robot humanoid robot. Thanks to its high torque, it can be used in walking robots (Hexapod) or robotic arms. Pololu 3400
Retired
No product available!
PCB and programmed circuit for remote control switch with two relays. AVT5551 A +
Delivery date unknown
No product available!
AVT kit for self-assembly of a remotely controlled switch with two relays. AVT5551 B
Delivery date unknown
No product available!
Romeo family evaluation kit with Bluetooth 4.0 module. It is based on the STM32F103RET6 microcontroller and has a built-in four-channel DC motor driver. DFRobot DFR0398