Segger Flasher ATE Programming Module (5.18.02)

Description

Segger Flasher ATE Programming Module is a programming module that is an element of the programming system for microcontrollers and microprocessors, which is intended for production applications. The module is equipped with a JTAG 20-pin interface that allows you to connect a programmed target system. As part of the system, up to 10 programming modules can be simultaneously connected to the ATE Flasher mainboard. Each module can have an individual configuration and batch, so that the system supports multiple devices in parallel, regardless of whether they are the same or different.

The set is operated using standard Segger applications such as J-Flash and J-Link Configurator. The programming process is controlled by a terminal or an embedded server and a web browser.

The system is designed for large-scale mass production. To meet the special requirements of high-volume production environments, the Gang Programmer can be mounted in 19-inch racks or directly to ATE. The ultra-fast flash algorithms used by ATE Flasher are the same industry-leading and proven algorithms that are also found in SEGGER's J-Link family of debugging devices and Flasher programming devices. Each programming module includes a programming license for all supported chips.

Segger Flasher ATE supports a wide range of microcontrollers and microprocessors with Cortex-M, Cortex-A, Cortex-R and ARM7, ARM9 and ARM11 cores of most manufacturers and a wide range of other chips, such as SPI-Flash memories. The full list of supported devices is available on the manufacturer's website.

Features

• Programming interface: JTAG 20-pin (14-pin adapter available)
• Programming Cable Length: 20cm (max. 2m, but may reduce the maximum interface speed)
• Serial baud rate between ATE Flasher and programmable chip: 15 MHz
• The supply voltage of the programmed system: 3 to 15 V
• Supply current of the programmed system: max. 400 mA
• Working temperature: 5°C to 60°C
• Storage temperature: -20°C to 65°C
• Relative humidity (non-condensing): <90% RH
• Dimensions: 108 x 35 x 20 mm
• Weight: 24 g

Kit contains

• Flasher ATE Programming Module
• 20-pin cable
• A set of screws