Segger Flasher Portable PLUS (5.16.02)

Description

The handheld stand-alone Flash Programmer for on-chip and external flash memory. Flasher Portable PLUS is a battery driven programming tool for microcontrollers with on-chip and/or external flash memory. It has been designed to fill the need of an extremely portable, production grade flash programmer used for in-field firmware updates.

Flasher Portable PLUS can be powered by its internal rechargeable battery or USB. Use the integrated 1.8 inch display to review your firmware and programming status.

Initial setup/preparation for stand-alone mode operation is done via the J-Flash software, also used by other Flasher models, which requires a PC running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8 or Windows 10.

Flasher Portable PLUS also supports having up to 16 configurations/image files stored on the Flasher, so one unit can be used for different targets, versions or configurations. Proper image selection is done by simply clicking a button. The currently selected image is displayed.

Isolators to optically isolate the Flasher Portable PLUS from Power Supply or the target and adapters for all common connectors are available for the Flasher Portable PLUS. Each Flasher includes the licenses to program with all supported MCUs.

Features

• Stand-alone in-circuit-programmer (Once set up, Flasher can be controlled without the use of a PC program)
• Powered by internal battery rechargeable Li-Ion 680mAh, no external power supply required
• Full insights with the new 1.8 inch display
• Up to 10 hours programming with one battery charge
• Supports having up to 16 configurations/data files being stored on Flasher
• Push button allows easy selection between multiple images/configurations stored on Flasher
• 128 MB internal memory for configuration and data file storage
• Supports ARM, Cortex, PowerPC and Renesas RX cores.
• Supports internal and external flash devices
• Data files can be updated via mass storage or via J-Flash
• Target interface: JTAG / SWD / FINE / SPD
• Programming speed typically between 30 KB/second and 1 MByte/second. Max. programming speed highly depends on target hardware and max. programming speed of the flash itself

Kit contains

• Flasher Portable PLUS
• 20 Pin 0.1" Ribbon Cable
• USB Cable
• Li-Ion Battery