Module with RGB diode WS2812B for Wemos D1 Mini
ID: 1180544
5906623442928
zł4.31
Tax included
zł3.50 tax excl.
Module with addressed RGB diode WS2812B designed for Wemos D1 Mini boards
Description
Module with addressed RGB diode WS2812B designed for Wemos D1 Mini boards. It uses a built-in driver that communicates via a special digital protocol, so only one pin of the microcontroller is enough to operate the module.
Features
- RGB LED WS2812B
- Current consumption: up to 100 mA
- Each of the primary colors of the diode (R, G, B) can adopt up to 256 levels of brightness
- The possibility of obtaining a color in one of over 16.7 million color shades
- Control via a single-wire digital interface
Kit contains
- Module with RGB diode WS2812B for Wemos D1
- Set of goldpin connectors
1180544
Data sheet
- Obudowa diody
- SMD5050
- Colour
- RGB
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
zł19.36
24h
Available quantity: 40
Available
Module with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł12.87
24h
Available quantity: 10
Available
Relay module for the WeMos D1 Mini WiFi set
zł5.41
24h
Available quantity: 18
Available
Development board D1 Mini V3 with WiFi module ESP-8266 and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini V3.x
zł18.76
24h
Available quantity: 20
Available
Development board D1 Mini Pro with WiFi ESP8266 module and 16 MB Flash memory, equipped with ceramic antenna and external antenna connector. The module can be programmed from the Arduino IDE level. WeMos D1 Mini Pro
zł25.71
24h
Available quantity: 20
Available
RTC DS1307 real-time clock module and battery CR1220 for the WeMos D1 Mini
zł7.59
Delivery date unknown
No product available!
Other products in the same category (16)
Available
Colorful RGB LED in SMD5050 housing enclosed in a housing with a controller communicating via the SPI interface. The diodes can be connected in series, so that entire chains of such diodes can be controlled using four wires. APA102
zł11.48
24h
Available quantity: 9
Available
Available
Light-emitting diode (LED) with a beam angle of 120 ° and luminosity of 100 mcd. The maximum current of the diode is I max = 20mA (2.0V), and the wavelength is 474 nm (green). LED ALS-0805G-00100-120
zł1.14
24h
Available quantity: 102
Available
Available
WS2812S is a three-color, closed in a housing with a controller, RGB diode in an SMD5050 housing with PLCC-6 terminals. The diodes can be connected in series, thanks to which you can control whole chains of such diodes with three wires.
zł1.16
24h
Available quantity: 2237
Available
Available
LED 0805 yellow, 100 mcd (20 mA) (2.0 V)
zł0.33
24h
Available quantity: 530
Available
The LS Q976-NR-1 is a red SMD LED with a wavelength of 633 nm and a brightness of 180 mcd at 20 mA current. Thanks to its compact 0603 package (1.6 mm x 0.8 mm x 0.8 mm), it is ideal for space-saving applications such as display backlighting or signaling in electronic devices. The LED features a viewing angle of 160° and a typical forward voltage of 2 V, making it an efficient and versatile component for electronic projects.
zł0.64
24h
Available quantity: 30
Available
Available
Light-emitting diode (LED) with a viewing angle of 120 ° and luminosity of 60 mcd. The maximum current of the diode is Imax = 20mA (1.9V), and the wavelength is 637nm (red). LED ALS-1206R-opto-00060-120
zł0.22
24h
Available quantity: 76
Available
LED 0805 yellow, 100 mcd (20 mA) (2.0 V)
zł0.58
24h
Available quantity: 402
Available
Available
Available
Available
Available
Module with addressed RGB diode WS2812B designed for Wemos D1 Mini boards