- New
Set of 5 Royal Blue LEDs - Adafruit 1757
ID: 1204543
zł20.05
Tax included
zł16.30 tax excl.
Set of 5 miniature LED Sequin modules with a Royal Blue LED in a 1206 package and a 100 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 1757
Description
Miniature LED Sequin modules allow adding lighting effects to wearable electronics, e-textiles, and decorative electronic projects. Each module includes a Royal Blue LED in a 1206 package and a 100 Ω resistor that limits current. Mounting holes allow the module to be sewn onto fabric using conductive thread or connected using soldered wires.
To operate the module, connect a voltage from 3 - 6 V to the positive pin and ground to the negative pin. The module can operate directly from a Li-Po battery or a coin cell battery, as well as from microcontroller outputs such as Adafruit Gemma or Flora. PWM control enables effects such as smooth fading, dimming, or blinking of the LED. Small board dimensions and mounting holes simplify integration into textile and wearable electronics projects.
Features
- LED color: Royal Blue
- LED type: SMD 1206
- On-board resistor: 100 Ω
- Supply voltage: 3 - 6 V
- Current consumption at 3.3 V: about 5 mA
- PWM control from a microcontroller
- Direct power from Li-Po battery or coin cell battery
- Mounting hole spacing: 7 mm
- Board thickness: 2 mm
- Module dimensions: 4 x 9 x 2 mm
Kit includes
- 5 Royal Blue LED Sequin modules
1204543
Data sheet
- Obudowa diody
- 1206
- Colour
- Blue
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Set of 5 miniature LED Sequin modules with a Cool White LED in a 1206 package and a 100 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 6456
zł20.05
Delivery date unknown
No product available!
Set of 5 miniature LED Sequin modules with LEDs in different colors in a 1206 package and a current-limiting resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 3377
zł20.05
Delivery date unknown
No product available!
Set of 5 miniature LED Sequin modules with an Emerald Green LED in a 1206 package and a 100 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 1756
zł20.05
Delivery date unknown
No product available!
Set of 5 miniature LED Sequin modules with a Ruby Red LED in a 1206 package and a 220 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 1755
zł20.05
Delivery date unknown
No product available!
Set of 5 miniature LED Sequin modules with Rose Pink LED (1206 package) and 100 Ω resistor. Designed for wearable and e-textile projects, powered by 3 - 6 V with control via microcontroller or direct battery connection. Adafruit 1792
zł20.05
Delivery date unknown
No product available!
Set of 5 miniature LED Sequin modules with Warm White LED (1206 package) and 100 Ω resistor. Designed for wearable and e-textile projects, powered by 3 - 6 V with control via microcontroller or direct battery connection. Adafruit 1758
zł20.05
Delivery date unknown
No product available!
Other products in the same category (16)
WS2812S is a three-color, closed in a housing with a controller, RGB diode in an SMD5050 housing with PLCC-6 terminals. The diodes can be connected in series, thanks to which you can control whole chains of such diodes with three wires.
zł1.16
24h
Available quantity: 2134
Available
LED 0805 yellow, 100 mcd (20 mA) (2.0 V)
zł0.58
24h
Available quantity: 392
Available
Available
Available
Available
Light-emitting diode (LED) with a viewing angle of 120 ° and luminosity of 60 mcd. The maximum current of the diode is Imax = 20mA (1.9V), and the wavelength is 637nm (red). LED ALS-1206R-opto-00060-120
zł0.22
24h
Available quantity: 66
Available
Available
Available
Module with RGB LED WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020169
zł24.54
24h
Available quantity: 2
Available
WS2812C-2020, intelligent LED 5mA 0.1W, 2020
zł1.21
24h
Available quantity: 4473
Available
Module with addressed RGB diode WS2812B designed for Wemos D1 Mini boards
zł4.31
24h
Available quantity: 4
Available
The LS Q976-NR-1 is a red SMD LED with a wavelength of 633 nm and a brightness of 180 mcd at 20 mA current. Thanks to its compact 0603 package (1.6 mm x 0.8 mm x 0.8 mm), it is ideal for space-saving applications such as display backlighting or signaling in electronic devices. The LED features a viewing angle of 160° and a typical forward voltage of 2 V, making it an efficient and versatile component for electronic projects.
zł0.64
24h
Available quantity: 25
Available
Colorful RGB LED in SMD5050 housing enclosed in a housing with a controller communicating via the SPI interface. The diodes can be connected in series, so that entire chains of such diodes can be controlled using four wires. APA102
zł22.90
24h
Available quantity: 9
Available
Set of 5 miniature LED Sequin modules with a Cool White LED in a 1206 package and a 100 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 6456
zł20.05
4 weeks
No product available!
Set of 5 miniature LED Sequin modules with LEDs in different colors in a 1206 package and a current-limiting resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 3377
zł20.05
4 weeks
No product available!
Set of 5 miniature LED Sequin modules with an Emerald Green LED in a 1206 package and a 100 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 1756
zł20.05
4 weeks
No product available!
Set of 5 miniature LED Sequin modules with a Royal Blue LED in a 1206 package and a 100 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 1757