- New
zł30.52
SEQURE ANT ESC - ESC 50A 2-3S controller
ID: 1205240
zł125.98
Tax included
zł102.42 tax excl.
Designed for small RC crawlers in 1/24–1/12 scale, this speed controller offers high performance and precise motor control. The device runs on ESCape32 firmware and supports DShot, PWM, Oneshot, and Multishot protocols, ensuring quick response and smooth power control. Maximum current is 50A continuous and 100A burst, and a built-in 6V/3A BEC powers the onboard electronics and servos. SEQURE ANT ESC 50A 2-3S
Description
SEQURE ANT ESC is a compact electronic speed controller designed for small RC crawler vehicles in 1/24, 1/18, 1/16, and 1/12 scales. The device is part of the SEQURE drive system and offers high performance in a very small footprint, ensuring it does not negatively affect the model’s balance or center of gravity. The design is protected by PCB potting with resin and an aluminum heatsink, providing water and dust resistance as well as improved cooling performance. The ESC delivers stable and precise motor control, which is essential for off-road vehicles requiring smooth power modulation.
The unit is equipped with a microcontroller running ESCape32 firmware, supporting modern control protocols such as DShot, PWM, Oneshot, and Multishot. This ensures very fast response to control signals and high motor control precision. The maximum continuous current is 50 A with adequate cooling, while peak current reaches 100 A, allowing operation in demanding off-road conditions. A built-in 6V / 3A BEC provides stable power for servos and onboard electronics. Additionally, the ESC features an electronic power switch, eliminating mechanical wear and improving system reliability.
SEQURE ANT ESC also offers configurable operating parameters via computer or mobile device, allowing adjustment of motor timing, braking, throttle response, and voltage and temperature protection settings. The compact design measuring 32 × 15 × 11 mm and weighing 16.5 g makes installation in small RC models easy. Thanks to plug & play functionality and included cables, installation is quick and convenient. This is an ideal solution for users seeking a modern, lightweight, and configurable ESC for precision crawler models.
Features
- Model: SEQURE ANT ESC
- Firmware: ESCape32
- Input voltage: DC 7–13 V (2–3S LiPo)
- Continuous current: 50 A
- Peak current: 100 A
- Supported protocols: DShot (all), PWM, Oneshot, Multishot
- Programmable parameters
- Current sensing
- RGB LED
- BEC: 6 V / 3 A (continuous)
- Electronic power switch: one-button start/stop
- Power cable: 105 mm, motor cable: 70 mm, signal cable: 130 mm
- Application: RC models 1/12, 1/16, 1/18, 1/24
- Dimensions: 32 × 15 × 11 mm
- Weight: 16.5 g
Kit contains
- SEQURE ANT ESC
- PH2.0 - JST cable
- PH2.0 - MX2.0 cable
- 3M double-sided tape
- 2 × cable ties
1205240
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A brushless BLDC motor designed for small RC crawlers in 1/24–1/16 scale, offering a good balance of power and efficiency. Its 9N12P configuration and constant 3500KV output ensure smooth operation and adequate dynamics in challenging terrain. It supports 2–3S LiPo power and features 20AWG wires with a PH2.0-3P connector for easy installation. Its compact size and weight of 16.8g ensure it doesn\'t compromise the model\'s balance or center of gravity. SEQURE 1520 2–3S 3500KV
zł84.87
24h
Available quantity: 3
Available
Other products in the same category (16)
Two-channel ESC controller for brushed motors. It can deliver 40 A and has wires terminated with an XT60 connector
zł92.50
24h
Available quantity: 2
Available
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
zł60.61
4 weeks
No product available!
Miniature ESC type controller for a DC motor with an input from 3.7 V to 5 V. Offers an additional output current of up to 1.5 A and allows you to control the motor in a channel mixing device
zł64.64
24h
Available quantity: 1
Available
An advanced speed controller designed to power three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12V to 56V. Maximum constant current is 60A. Makerbase ODrive-S
zł293.93
24h
Available quantity: 9
Available
The ODrive3.6 ESC speed controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6
zł412.21
4 weeks
No product available!
Set with ODrive3.6 ESC speed controller and MKS X2212 BLDC motor. The controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6 Kit
zł640.22
24h
Available quantity: 2
Available
A speed controller based on the open VESC standard, designed for electric skateboards, scooters, and e-bikes. It supports voltages from 14 to 75 V and continuous currents up to 100 A, offering various BLDC motor control modes, and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design and extensive security features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100
zł531.68
4 weeks
No product available!
This speed controller is designed for high voltage and high current applications, ideal for electric vehicles, e-foils, and robotics. It supports voltages up to 84 V and continuous currents up to 200 A. Its ARM Cortex-M4 STM32F405RG processor ensures precise control and fast signal processing. It supports various control modes, works with BLDC and DC motors in both sensored and sensorless versions, and is configured via USB or Bluetooth using the VESC Tool. Makerbase VESC 75200 V2
zł776.23
4 weeks
No product available!
An advanced speed controller designed to power three-phase brushless motors in a variety of applications such as electric scooters, electric skateboards and electric bicycles. It supports an input voltage range of 8 V to 60 V, which corresponds to 3S to 13S for LiPo batteries, and a maximum current of up to 50 A. Makerbase VESC MINI 6.7 Pro
zł430.32
24h
Available quantity: 4
Available
2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel
zł45.02
24h
Available quantity: 1
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 15 A per channel
zł96.96
24h
Available quantity: 4
Available
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 3 A per channel
zł53.53
4 weeks
No product available!
ESC controller module for a brushless motor with a current capacity of up to 40 A. It can work with LiPo packages from 3S to 6S. Uses BLHeli_32 software. Skystars Talon32
zł78.14
24h
Available quantity: 3
Available
ESC controller module for a brushless motor with a current capacity of up to 120 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł538.99
24h
Available quantity: 1
Available
ESC controller module for a brushless motor with a current capacity of up to 80 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł445.74
4 weeks
No product available!
Programming module for AM32 and BLS32 series ESC controllers. It allows you to easily update the controller software via the USB Type-C connector. RhinoESC Crawler
zł30.57
4 weeks
No product available!
Designed for small RC crawlers in 1/24–1/12 scale, this speed controller offers high performance and precise motor control. The device runs on ESCape32 firmware and supports DShot, PWM, Oneshot, and Multishot protocols, ensuring quick response and smooth power control. Maximum current is 50A continuous and 100A burst, and a built-in 6V/3A BEC powers the onboard electronics and servos. SEQURE ANT ESC 50A 2-3S