DC-DC inverter module Step-Down 6.2 ... 50V - 6V D36V6F6
ID: 572721
zł35.13
Tax included
zł28.56 tax excl.
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Step-Down DC / DC converter (D36V6F6) that reduces the input voltage (6.2 ... 50 V) to 6 V. The maximum current efficiency of the inverter module is 600 mA, it is the maximum continuous current that can be taken from the inverter. The efficiency of the converter ranges from 80 to 90%, which makes it a much better solution than linear voltage stabilizers. The inverter has protection against short-circuiting output and temperature protection. The inverter module has an additional pin allowing to turn off the inverter output. Due to its small size, it will be used in any project requiring stable power supply.
Attention!
In the case of an input voltage exceeding 28 V, the manufacturer recommends placing an additional electrolytic capacitor (at least 33uF) between the VIN and GND pins.
properties
- Input voltage: 6.2 ... 50 V
- Output voltage: 6 V
- Maximum continuous current consumed: 600 mA
- High efficiency: 80-90%
- Built-in security:
- before shorting the output
- temperature protection
- Switching frequency 2.1 MHz
- Low quiescent current: <0.1 mA
- Dimensions: 13 x 10 x 3 mm
- Weight: 0.5 g
Included
- D36V6F6 inverter module
- Straight 4 pin male connector
- Male connector, angled 4 pin
572721
Data sheet
- Output voltage
- 6.0V
- Output current
- 0.6A
- Converter type
- Step-down
- Supply voltage min
- 6,2 V
- Supply voltages max
- 50 V
You might also like
Przetwornica DC-DC Step Down (MP1584), Uwe 4.5..28V, Uwy regulowane 0.8..20V, RoHS
zł5.03
24h
Available quantity: 469
Available
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł9.56
24h
Available quantity: 7
Available
Step Down DC-DC converter module based on LM2596 circuit, input voltage 3-40V, regulated output voltage 1.5--35V
zł4.34
24h
Available quantity: 205
Available
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
zł35.14
24h
Available quantity: 1
Available
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
zł29.54
24h
Available quantity: 2
Available
Other products in the same category (16)
Step-Down Voltage Regulator D24V25F5. Pololu 2850
zł77.03
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F9 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 9 V while allowing for a maximum output current of 500 mA. Pololu 2845
zł28.82
24h
Available quantity: 1
Available
VRM: Voltage Regulator Module (Rev. B) is a step-down converter based on the Texas Instruments TPS54620 chipset. Input voltage in the range 5 ... 15 V, output voltage 3.3 V or 5 V. Digilent 210-156
zł99.70
6 weeks
No product available!
The Step Down DC-DC converter module (MP2307) allows to obtain 0.93..18V output voltage at 4.75..24V input voltage. The output voltage is regulated by a potentiometer
zł9.56
24h
Available quantity: 7
Available
DC-DC Step-Up converter U3V40F7 with an output voltage of 7.5 V, an input voltage of 1.3 to 7.5 V and a maximum output current of 4 A. Pololu 4014
zł38.60
24h
Available quantity: 5
Available
DC-DC Step Down converter module with input voltage from 7 to 24 V and output voltage of 5 V. Can supply currents up to 4 A. DFRobot DFR0831
zł26.72
24h
Available quantity: 6
Available
DC-DC Step-Down converter module AP63203 with an output voltage of 3.3 V, an input voltage of 3.8 to 32 V and a maximum output current of 2 A. SparkFun COM-18356
zł28.30
24h
Available quantity: 4
Available
The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844
zł28.40
6 weeks
No product available!
DC-DC Step-Down converter module AP63203 with an output voltage of 3.3 V, an input voltage of 3.8 to 32 V and a maximum output current of 2 A. SparkFun COM-18357
zł23.92
24h
Available quantity: 6
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.4 A and features reverse voltage protection.
zł61.12
6 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F1 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 1.8 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 75% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł28.40
24h
Available quantity: 1
Available
The Step-Down D24V6F5 Buck Voltage Regulator module gives the output voltage of 5V with a wide input voltage range of 7-42V and a maximum output current of 600 mA. Pololu 2107
zł33.26
24h
Available quantity: 3
Available
Step-Down RT8272 converter with adjustable output voltage in the range from 5 V to 12 V, input voltage from 5 to 24 V and a maximum output current of 3 A
zł10.33
24h
Available quantity: 19
Available
Step-Down converter D36V28F12 with an output voltage of 12 V, an input voltage from 12.9 to 50 V and a maximum output current of 3.3 A. Pololu 3786
zł90.98
24h
Available quantity: 2
Available
An isolated DC-DC converter that can be powered from 36 to 72 V DC and supplies 5 V DC and up to 20 A. The device is supplied in an IP65 enclosure. SparkFun COM-18733
zł179.90
6 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40V and efficiently reduces it to 5V with an available output current of around 15A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. Pololu 2881
zł459.00
24h
Available quantity: 1
Available
Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793