DC-DC Step-Up converter module 6V 4A U3V40F6
ID: 588694
5906623413164
zł39.15
Tax included
zł31.83 tax excl.
DC-DC Step-Up converter U3V40F6 with an output voltage of 6 V, an input voltage of 1.3 to 6 V and a maximum output current of 4 A. Pololu 4013
Description
The U3V40F5 DC-DC Step-Up converter module with an output voltage of 6 V and an input voltage from 1.3 to 6 V. The maximum instantaneous load of the module is 9.5 A, however, with prolonged use, the current above 4 A may activate the thermal protection. The converter achieves standard efficiency above 90-95% with similar values of the input and output voltage. The module has protection against overheating and too high voltage.
Pinout
- VIN - power input (1.3-6 V)
- GND - ground
- VOUT - exit
- EN - converter is turned on by default (30 kΩ pull-up resistor on the board connects EN pin with VIN). The ENABLE pin can be set low (below 0.4V) to turn off the power and put the board into a low-power state.
Features
- Input voltage: from 1.3 to 6 V (the moment of switching on requires a voltage of at least 2.7 V)
- Output voltage: 6V
- Type. maximum current: 9.5 A (momentary), 4.5 A (for a few seconds), 4 A (continuous current)
- Built-in protection against overheating, over voltage
- Type. efficiency: 90-95%
- The possibility of mounting goldpins
- Dimensions: 15.2 x 15.2 x 5.6 mm
- Weight: 1.5 g
Regulator parameters
Kit contains
- U3V40F6 converter module
- Straight 6-pin goldpin connector
- 6-pin angled goldpin connector
588694
Data sheet
- Output voltage
- 6.0V
- Output current
- 4A
- Converter type
- Step-up
- Supply voltage min
- 1,3 V
- Supply voltages max
- 6 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A switching converter that regulates 12V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5585
zł13.17
6 weeks
No product available!
Pololu Adjustable 4-12V Step-Up Voltage Regulator U3V50ALV
zł110.21
4 weeks
No product available!
A switching converter that regulates 24V voltage from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5588
zł14.17
6 weeks
No product available!
A small DC - DC boost module that converts a 0.9..5V power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. It integrates a PFM DC-DC boost control chip. FIT0471
zł19.75
24h
Available quantity: 3
Available
The Step-Up converter module converts the voltage in the range of 3.5-30V to 4-30V with an efficiency of over 90% and a maximum power of 80W. Its compact dimensions (3.8 x 5.2 x 2cm) and wide operating temperature range (-40 - 85°C) make it ideal for many applications.
zł9.78
24h
Available quantity: 1
Available
DC-DC Step-Up converter U3V40F7 with an output voltage of 7.5 V, an input voltage of 1.3 to 7.5 V and a maximum output current of 4 A. Pololu 4014
zł44.74
24h
Available quantity: 4
Available
Module with a single-purpose LiPo charger and Step-Up converter with an output voltage of 5 V and current efficiency up to 1 A. SparkFun PRT-14380
zł95.10
24h
Available quantity: 1
Available
Pololu 12V Step-Up Voltage Regulator U3V50F12
zł135.15
24h
Available quantity: 2
Available
DC-DC Step-Up converter U3V40F12 with an output voltage of 12 V, an input voltage of 1.3 to 12 V and a maximum output current of 4 A. Pololu 4016
zł36.99
24h
Available quantity: 1
Available
The USB Step-Up converter module in the housing allows you to adjust the voltage in the range of 3.5-15V to 0.5-30V, with a maximum current of 2A and a power of 15W. The device is characterized by high precision, voltage resolution 0.01V, current resolution 0.001A, voltage accuracy 0.3% and current accuracy 0.5%, and can operate in temperatures from -40°C to 85°C.
zł93.47
24h
Available quantity: 4
Available
A switching converter that regulates 18V from an input range of 2.6V to 20V. It offers high efficiency of 70-95% and the ability to operate with a continuous input current of up to 900mA and a peak current limit of 2.2A. With a switching frequency of 1.6MHz and a power-saving mode, it is suitable for both high-performance and low-power applications. Pololu 5587
zł14.17
6 weeks
No product available!
Step DC-DC converter, Uwe 3.5-30 V, adjustable 4-30 V, RoHS
zł6.90
24h
Available quantity: 7
Available
The USB Step-Up converter module converts the voltage in the range of 4-13V for pads and 5V for USB to 0.5-30V, supporting current up to 2A and power up to 15W. It is characterized by high measurement accuracy, advanced protective functions and compact dimensions of 84 x 35 x 14mm.
zł18.03
4 weeks
No product available!
The Step-Up Buck Voltage Regulator module with output voltage of 3.3V and input voltage range of 1-3V and a maximum output current of 200 mA. SparkFun PRT-10967
zł25.94
3 weeks
No product available!
DC-DC Step-up converter module based on the U3V70F5 system. Input voltage 2.9 ... 5V, output voltage 5V, maximum current 10A. Two mounting holes. Polol 2891
zł82.90
24h
Available quantity: 3
Available
The Step-Up Buck Voltage Regulator module with adjustable output voltage in range of 2.5-9.5V with a input voltage range of 1.5-16V and a maximum output current of 2A. Pololu 791
zł81.56
24h
Available quantity: 1
Available
DC-DC Step-Up converter U3V40F6 with an output voltage of 6 V, an input voltage of 1.3 to 6 V and a maximum output current of 4 A. Pololu 4013