New products
New products
zł67.99
24h
Available
zł69.00
24h
Available
zł67.99
24h
Available
Available
zł79.00
24h
Available
zł67.99
24h
Available
zł69.00
24h
Available
zł67.99
24h
Available
Available
zł79.00
24h
Available
DC-DC Step-Up converter module 9V 4A U3V40F9
ID: 588696
5906623480692
zł38.60
Tax included
zł31.38 tax excl.
DC-DC Step-Up converter U3V40F9 with an output voltage of 9 V, an input voltage of 1.3 to 9 V and a maximum output current of 4 A. Pololu 4015
Description
The U3V40F9 DC-DC Step-Up converter module with an output voltage of 9 V and an input voltage from 1.3 to 9 V. The maximum instantaneous load of the module is 9.5 A, however, with prolonged use, the current above 4 A may activate the thermal protection. The converter achieves standard efficiency above 90-95% with similar values of the input and output voltage. The module has protection against overheating and too high voltage.
Pinout
- VIN - power input (1.3-9 V)
- GND - ground
- VOUT - exit
- EN - converter is turned on by default (30 kΩ pull-up resistor on the board connects EN pin with VIN). The ENABLE pin can be set low (below 0.4V) to turn off the power and put the board into a low-power state.
Features
- Input voltage: from 1.3 to 9 V (the moment of switching on requires a voltage of at least 2.7 V)
- Output voltage: 9V
- Type. maximum current: 9.5 A (momentary), 4.5 A (for a few seconds), 4 A (continuous current)
- Built-in protection against overheating, over voltage
- Type. efficiency: 90-95%
- The possibility of mounting goldpins
- Dimensions: 15.2 x 15.2 x 5.6 mm
- Weight: 1.5 g
Regulator parameters
Kit contains
- U3V40F9 converter module
- Straight 6-pin goldpin connector
- 6-pin angled goldpin connector
588696
Data sheet
- Output voltage
- 9 V
- Output current
- 4A
- Converter type
- Step-up
- Supply voltage min
- 1,3 V
- Supply voltages max
- 9
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The USB Step-Up 9V 6W converter module converts the input voltage in the range of 4.2-5.2V to a constant output voltage of 9V, with a maximum current of 1A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.
zł3.89 24hAvailable quantity: 29 AvailablePololu 9V Step-Up Voltage Regulator U3V50F9
zł120.22 24hAvailable quantity: 1 AvailableStep-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 7.5 V and a maximum input of up to 2 A. Pololu 4943
zł20.85 24hAvailable quantity: 5 AvailableThe Step-Up converter module converts the voltage in the range of 10-60V to 12-90V with an efficiency of 97% and operates in the temperature range of -20°C to 65°C. The maximum current is 40A at the input and 22A at the output, with a weight of 400g.
zł100.18 24hAvailable quantity: 2 AvailablePololu 5V Step-Up Voltage Regulator U1V10F5
zł27.63 24hAvailable quantity: 2 AvailableStep-Up converter with an output voltage of 5 V, an input voltage of 0.9 to 5 V and a maximum current of 0.48 A
zł4.08 24hAvailable quantity: 17 AvailableVoltage converter module with symmetrical output ±19 V and 2x 9,5 V with a maximum power of 200 W. Used, among others, to power audio amplifiers
zł92.31 24hAvailable quantity: 1 AvailableThis powerful boost regulator efficiently boosts input voltages as low as 2.9 V to a higher, adjustable output voltage between 9 V and 30 V while allowing an input current as high as 5 A.
zł139.89 6 weeks No product available!
A cable with a built-in converter that increases the voltage from the USB connector to 12 V. It is equipped with a DC Jack 2.1 x 5.5 mm plug
zł5.76 24hAvailable quantity: 15 AvailableStep-Up converter U3V70A with an output voltage from 4.5 to 20 V, an input voltage from 2.9 to VOUT and a maximum output current of 10 A. Pololu 2890
zł111.47 6 weeks No product available!
Step-Up converter module with adjustable output voltage in the range from 3 to 30 V with a wide input voltage range from 2 to 24 V and a maximum output current of 4 A. The board is equipped with a USB connector
zł28.04 24hAvailable quantity: 4 AvailableStep-Up converter with adjustable output voltage from 5 to 40 V, input voltage from 3 to 35 V and a maximum current of 5 A
zł8.56 6 weeks No product available!
The USB Step-Up converter module converts 3.5-12V input voltage to 4-24V output, offering different power values depending on the voltage level. Equipped with a 3-bit digital display, it has a compact size of 80 x 20 x 14mm.
zł10.11 24hAvailable quantity: 5 AvailableStep-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 6 V and a maximum input of up to 2 A. Pololu 4942
zł18.93 24hAvailable quantity: 4 AvailableStep-Up converter with an output voltage of 5 to 28 V, an input voltage of 2 to 24 V and a maximum current of 2 A
zł4.65 24hAvailable quantity: 16 AvailableDC-DC Step-Up converter module with adjustable output voltage of 5 V, 8 V, 9 V or 12 V. The module can be powered with the voltage from 2.5 to 12 V, making it compatible, for example, with Lithium batteries with a nominal voltage of 3 , 7 V.
zł3.95 6 weeks No product available!
DC-DC Step-Up converter U3V40F9 with an output voltage of 9 V, an input voltage of 1.3 to 9 V and a maximum output current of 4 A. Pololu 4015