Teensy Prop Shield LC
ID: 562646
5906623412525
zł61.16
Tax included
zł49.72 tax excl.
Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. PJRC PROP-SHIELD-LC
Description
This low-cost (LC) Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. This economical board is approximately the size of a Teensy, just slightly longer to allow space for mounting holes and connections for power, speaker and LEDs.
This lower-cost Prop Shield is identical to the standard Prop Shield, except the motion sensors are removed. Keep in mind that this shield can be used with the Teensy 3.2 and is not restricted to use only with other “LC” models.
The Teensy Prop Shield has been equipped with a slew of neat features. Need an amplifier? The Teensy Prop Shield has one rated at 2W and is capable of driving 4 or 8 Ohm speakers. Additionally the Prop Shield has 5V buffers meant to send data to Dotstar or APA102 type addressable LEDs. It also has an onboard 8MB flash memory, meant for storing sound clips and images, logging data and many other uses.
Features
- Audio Amplifier – Clear quality audio output to a small speaker
- Fast LED Driver – Drive APA102 / Dotstar LEDs for colorful lighting with rapid response
- Flash Memory – 8MB storage for images, sound clips and data logging
562646
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A small module, matching the breadboard, containing a 32-bit microcontroller with ARM Cortex M7 core. PJRC TEENSY40
zł126.73
Delivery date unknown
No product available!
Other products in the same category (16)
Development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY40_PINS
zł135.76
4 weeks
No product available!
Audio module designed for Teensy 3.2, 3.5, 3.6 and 4.0. It uses the PT8211 16-bit digital to analog converter (DAC) chip. PJRC PT8211-AUDIO-KIT
zł17.32
24h
Available quantity: 11
Available
Adapter dedicated to Teensy LC, Teensy 3.1 and Teensy 3.2 boards, which allows you to connect Arduino shields to them. SparkFun KIT-15716
zł67.90
24h
Available quantity: 2
Available
Audio module designed for Teensy 4.0 and 4.1. It uses the SGTL500 audio codec chip with I2S interface, it can work with a microSD card or SPI Flash memory. Audio Adapter Boards for Teensy 4.x (Rev D)
zł50.82
4 weeks
No product available!
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE
zł157.39
4 weeks
No product available!
A small module, matching the breadboard, containing a 32-bit microcontroller with ARM Cortex M7 core. PJRC TEENSY40
zł126.73
4 weeks
No product available!
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It uses the 74HCT245 chip and RJ45 connectors for communication with RGB LED strips. Teensy 3.2-4.1 PJRC OCTO28-ADAPTOR
zł69.90
24h
Available quantity: 2
Available
Module with 4 Qwiic connectors for Teensy boards. Communication via the I2C interface. SparkFun DEV-17119
zł22.15
24h
Available quantity: 1
Available
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has a microSD slot and an Ethernet chip. Version with access to secure software updates. PJRC TEENSY41-LOCK
zł199.00
24h
Available quantity: 2
Available
Module with 4 Qwiic connectors for Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Communication via the I2C interface. SparkFun DEV-17156
zł29.43
24h
Available quantity: 4
Available
8 MB PSRAM memory chip, designed for mounting on Teensy 4.1 boards. It enables the expansion of the memory of the microcontroller. PJRC IC-PSRAM-8MB-SOIC8
zł12.18
4 weeks
No product available!
A development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It is equipped with a DP83825 PHY Ethernet chip. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY41_PINS
zł187.76
4 weeks
No product available!
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
zł199.00
24h
Available quantity: 11
Available
Teensy 4.1 is the fastest microcontroller with ARM Cortex-M7 600 MHz processor, 55 I/O pins, many communication interfaces, and additional functions such as cryptography and RTC, enabling USB programming. It is equipped with a microSD slot and an additional 8 MB PSRAM memory chip
zł219.00
Delivery date unknown
No product available!
Ethernet module designed for Teensy 4.1. The board has an Ethernet connector and a 6-pin connector for connecting to Teensy. PJRC ETHERNET-KIT
zł25.60
4 weeks
No product available!
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
zł163.23
4 weeks
No product available!
Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. PJRC PROP-SHIELD-LC