- Out-of-Stock
MLX90640 thermal imaging camera module with 2.8" display
ID: 1186050
5906623452231
Thermal imaging camera module with an MLX90640 infrared sensor and a 2.8" TFT LCD display. It offers an accuracy of 2°C and a viewing angle of 55°x35°.
Description
Thermal imaging camera based on the MLX90640 infrared sensor and equipped with a 2.8" TFT LCD display. The MLX90640 sensor is a measurement matrix with a resolution of 32x24 pixels, which is able to precisely measure temperatures in the range from -40°C to 300°C. Thanks to the accuracy of level of ±2°C and a viewing angle of 55°x35°, enables a wide measurement range and excellent area analysis, and ensures precise and reliable measurements.
Thermal imaging data is displayed on a bright and readable TFT LCD screen with a diagonal of 2.8 inches and a resolution of 320x240 pixels. The set provides a refresh rate of 8 Hz. The module is equipped with built-in SPI memory, which allows you to store up to 100 photos. The camera is powered by a 3.7 V and 800 mAh battery. Thanks to this, it can operate for up to 4 hours on a single charge. Charging takes place using a standard USB Type C cable with a voltage of 5V/1A, which is convenient and available almost everywhere.
The thermal imaging camera is a versatile tool used in various fields due to its ability to measure and visualize temperature in the form of a thermal image. It is used in construction, machine inspection and the automotive industry.
Features
- MLX90640 infrared sensor, 32x24 matrix
- Range of measured temperatures: from -40°C to 300°C
- Accuracy: ± 2°C
- Viewing angle: 55°x35°
- 2.8" TFT LCD display with a resolution of 320x240 px
- Refresh rate: 8 Hz
- Built-in SPI memory, can store up to 100 photos
- Power supply: 3.7 V battery, 800 mAh (operating time up to 4 h)
- Charging: USB Type C, 5V/1A
- Dimensions: 85 x 55 x 20 mm
1186050
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Portable, pocket-sized phone-shaped thermal imaging camera with a 3.2" LCD screen. Measures temperature in the range from -20 to 300°C with an accuracy of 2°C. HTI HT-A1
Regular pricezł1,956.87zł1,499.00
24h
Available quantity: 2
Available
Other products in the same category (16)
1-meter long USB Type-C cable enabling fast data transmission and powering electronic devices with a USB C port, such as smartphones and Macbooks. It works in the USB 3.1 standard with speeds up to 5 Gb/s. Akyga AK-USB-25
Retired
No product available!
1-meter cable with a USB C plug, enabling data transmission between USB C and USB A devices and used as a charger tip, compatible with USB 3.1. Akyga AK-USB-15
Retired
No product available!
1.5-meter power extension cable with an IEC C13 plug and an IEC C5 connector, ideal for powering a home theater or as an extension for a laptop charger. Its high quality and length make it reliable even in hard-to-reach places. Akyga AK-NB-03A
Retired
No product available!
The USB-FDCAN converter is a device that enables communication between the computer and the CAN (Controller Area Network). It supports the CAN FD standard and is equipped with a Microchip MCP2542FD transceiver. FDCAN USB converter
Retired
No product available!
Test probe tip with 500X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP500-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
Retired
No product available!
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in USB port, GPIO and a microSD card slot. Waveshare Luckfox Pico M
Retired
No product available!
A development board that offers advanced programming and experimentation capabilities for smart device and industrial automation applications. It is based on the Rockchip RV1103 system, has an NPU unit and an ISP input. It offers a built-in Ethernet port, USB, GPIO and 128 MB of SPI Flash memory. Waveshare Luckfox Pico Plus M
Retired
No product available!
Module with a 2 MP camera equipped with an IMX390 sensor. It has a built-in manually adjustable focus. The set includes a USB 3.0 adapter, a tripod and a cable. ArduCAM B0476
Retired
No product available!
A set with four IMX708 cameras with a resolution of 12 MP and a Camarray HAT expansion module for Raspberry Pi, which allows you to simultaneously connect four cameras to a minicomputer. ArduCAM B0484
Retired
No product available!
Matrix display module with a Raspberry Pi Pico W control board. It has built-in 1024 RGB LEDs in a 32x32 arrangement, an amplifier with a speaker and buttons. Perfect for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM670
Retired
No product available!
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Included with accessories. Pimoroni PIM671
Retired
No product available!
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Pimoroni PIM655
Retired
No product available!
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM668
Retired
No product available!
Thermal imaging camera module with an MLX90640 infrared sensor and a 2.8" TFT LCD display. It offers an accuracy of 2°C and a viewing angle of 55°x35°.